Cooker hood installation · Tyne and Wear
Cooker hood installation in Newcastle upon Tyne
We take on cooker hood installation in Newcastle upon Tyne and the surrounding NE1 postcodes, working to a written scope so you know exactly what is included before anyone starts.

Why do people in Newcastle upon Tyne choose cooker hood installation?
A new kitchen in a Newcastle upon Tyne home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.
If your Newcastle upon Tyne house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. If your home is in Newcastle upon Tyne or close by in Gateshead or Gosforth, the same survey, quote and fitting process applies.
What we cover for cooker hood installation in Newcastle upon Tyne
The exact scope is agreed after the survey, but a typical job in Newcastle upon Tyne covers:
- Short, straight runs of rigid ducting wherever the route allows
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
- Hood fixed at the height set by the hood and hob manufacturers
- Recirculating hoods fitted with carbon filters, and their limits explained
- Core drilling through the outside wall and an external grille fitted and sealed
What should you budget for cooker hood installation in Newcastle upon Tyne?
The figures below are guide prices for Newcastle upon Tyne, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£220 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £270–£810 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £270–£570 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£270 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes around Newcastle upon Tyne
In and around Newcastle upon Tyne, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.
Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling. Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter.
What rules apply to cooker hood installation in Newcastle upon Tyne?
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.
Getting the most from your cooker hood installation
- If your Newcastle upon Tyne home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- Before choosing a hood for your Newcastle upon Tyne kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
Questions about cooker hood installation in Newcastle upon Tyne
How much does cooker hood installation cost in Newcastle upon Tyne?
Cooker hood installation in Newcastle upon Tyne typically costs £110 to £220 including VAT for a like-for-like cooker hood swap, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Can you measure up in Newcastle upon Tyne before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Newcastle upon Tyne. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Also covering nearby towns
Close to Newcastle upon Tyne? We cover these nearby towns too:
- Cooker hood installation in Gateshead
- Cooker hood installation in Gosforth
- Cooker hood installation in Felling
- Cooker hood installation in Wallsend
- Cooker hood installation in Hebburn
- Cooker hood installation in Jarrow
- Cooker hood installation across Tyne and Wear
Planning more than one job in Newcastle upon Tyne?
- Kitchen electrics in Newcastle upon Tyne
- Integrated appliance installation in Newcastle upon Tyne
- Kitchen refurbishment in Newcastle upon Tyne
- Supply and fit kitchens in Newcastle upon Tyne
- Fit-only kitchen fitting in Newcastle upon Tyne
- Hob and oven installation in Newcastle upon Tyne
- All kitchen services in Newcastle upon Tyne
