Cooker hood installation in Leicester

When does cooker hood installation make sense in Leicester?

Cooks across Leicestershire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.

People in flats across Leicestershire sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation. Our Leicestershire coverage reaches every part of Leicester (LE1 and LE19) and out towards Humberstone.

What does cooker hood installation in Leicester include?

The exact scope is agreed after the survey, but a typical job in Leicester covers:

Short, straight runs of rigid ducting wherever the route allows
Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed
Recirculating hoods fitted with carbon filters, and their limits explained
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Power supply connected by an electrician and tested to BS 7671

What does cooker hood installation cost in Leicester?

Use these ranges to plan your budget. They include VAT, reflect costs in the East Midlands, and are firmed up once we have seen your Leicester kitchen. For the East Midlands, these ranges are close to the national figures.

What does cooker hood installation cost in Leicester?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£290–£870
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£290–£610
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£290

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Leicestershire includes Victorian terraces, 1930s semis, post-war estate houses and new-build estates, so no two kitchen fits are quite alike. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early. Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help.

What rules apply to cooker hood installation in Leicester?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Tips before you start

If you live in a flat in Leicestershire, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Check whether your Leicester home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.

Questions about cooker hood installation in Leicester

How much does cooker hood installation cost in Leicester?

Cooker hood installation in Leicester typically costs £120 to £230 including VAT for a like-for-like cooker hood swap, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Leicester?

Yes. We work across Leicester, including the LE1 and LE19 postcode districts, and nearby towns such as Humberstone and Oadby. Book a free survey visit and we will arrange a time that suits you.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Also covering nearby towns

We also carry out cooker hood installation in these towns near Leicester: