Kitchen Installers UK

Cooker hood installation · Wales

Cooker hood installation in Gwynedd

Homeowners and landlords across Gwynedd can book us for cooker hood installation: ducted and recirculating cooker hoods fitted, with wall core drilling, ducting and an external grille.

Guide price£110 to £830
Towns covered3 towns, including Bangor, Gwynedd
Timescale3 to 7 hours for most hoods
A fitter on a step ladder fixing a stainless steel chimney cooker hood above a hob, with ducting visible above

Why cooker hood installation for a Gwynedd home?

If your Gwynedd house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.

People in flats across Gwynedd sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.

What does cooker hood installation in Gwynedd include?

Your written quote lists everything included. For cooker hood installation, that normally means:

  • Survey of the hob position, duct route, outside wall and any open-flued appliance
  • Hood fixed at the height set by the hood and hob manufacturers
  • Core drilling through the outside wall and an external grille fitted and sealed
  • Short, straight runs of rigid ducting wherever the route allows
  • Island and ceiling hoods fixed into the ceiling structure by two people
  • Recirculating hoods fitted with carbon filters, and their limits explained
  • Power supply connected by an electrician and tested to BS 7671
  • Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

How much does cooker hood installation cost in Gwynedd?

The figures below are guide prices for Gwynedd, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Costs across Wales tend to sit under UK averages, which these ranges reflect.

How much does cooker hood installation cost in Gwynedd?
Typical projectGuide price
Like-for-like cooker hood swapSame position and ducting£110–£220
New ducted hood through an outside wallCore drilling, ducting run and external grille£280–£830
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure£280–£580
Recirculating hood fittedNo ducting; carbon filters need replacing£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes across Gwynedd

You will find slate and stone cottages, quarry town terraces, farmhouses and seaside bungalows throughout Gwynedd. Quarry-town terraces and stone cottages often have a small back kitchen or lean-to, while bungalows on Anglesey and the coast tend to have a simple square kitchen.

Gwynedd's mains water is soft, so limescale is rarely an issue and taps, sinks and boiling water taps stay cleaner for longer. Mountain roads, narrow village streets and Anglesey addresses reached over the Menai bridges can affect delivery vehicles, so timing and worktop lengths are planned ahead.

Thick walls and damp-prone floors in stone and slate cottages usually shape how units are fixed and what finishes suit. Many rural homes are off the gas grid, and holiday lets often need a hard-wearing kitchen that is quick to clean.

Rules for cooker hood installation in Gwynedd

Wales has its own Approved Document F with the same broad rates: about 30 litres per second from a hood extracting outside, or 60 litres per second from a fan elsewhere. A recirculating hood does not remove moisture. Extending a kitchen circuit to power a hood is notifiable under Part P in Wales, and a new vent through the outside wall of a flat may need planning permission and the freeholder's consent.

Homes inside Eryri National Park, listed cottages and conservation areas may need consent for a new external vent or changes affecting historic features.

Before you start

  • Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
  • If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
  • Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
  • In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
  • Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
  • Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.

Questions about cooker hood installation in Gwynedd

How much does cooker hood installation cost in Gwynedd?

For a like-for-like cooker hood swap, budget around £110 to £220 including VAT in Gwynedd. That reflects typical costs in Wales; we confirm the actual figure in writing once we have measured up.

Do you cover the whole of Gwynedd?

Yes. We carry out cooker hood installation across Gwynedd, including Bangor, Gwynedd, Holyhead and Caernarfon. Every job starts with a free survey visit and an itemised written quote.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Cooker hood installation in towns across Gwynedd

Choose a town for local guide prices and postcode coverage:

Cooker hood installation in nearby areas

Free survey visit

Book a free survey visit in Gwynedd

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price