Cooker hood installation · England
Cooker hood installation in Bristol
Our cooker hood installation work covers the whole of Bristol, and we also work in neighbouring Somerset and Gloucestershire.
Is cooker hood installation right for your Bristol kitchen?
People in flats across Bristol sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.
Some Bristol households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.
What does cooker hood installation in Bristol include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Bristol?
These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£250 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £310–£930 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £310–£650 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£310 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Bristol
The housing mix across Bristol includes Victorian terraces, Georgian townhouses and flats, 1930s semis and flats in converted houses, so no two kitchen fits are quite alike. Bristol's Victorian terraces often have a narrow rear galley, while Georgian houses split into flats can have kitchens tucked into former bedrooms or reception rooms.
Bristol's mains water is hard, so limescale on taps, kettles and boiling water taps is common, and an inline filter or softener can help. Steep hillside streets, permit parking and terraces with no rear access are common in the city, so long worktops may need careful handling through the front door.
Many Bristol terraces have a small kitchen behind the back room, and opening the two into one space is a popular change. Where a flat sits in a converted Georgian or Victorian house, the work often means fitting a lot into a modest room while working around shared walls and services.
Rules for cooker hood installation in Bristol
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Many of the city's older streets are conservation areas and some houses are listed, so a new extractor vent or the removal of historic features may need consent first.
Before you start
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- Check whether your Bristol home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
- Before choosing a hood for your Bristol kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Questions about cooker hood installation in Bristol
How much does cooker hood installation cost in Bristol?
For a like-for-like cooker hood swap, budget around £120 to £250 including VAT in Bristol. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Bristol?
Yes. We carry out cooker hood installation across Bristol. Every job starts with a free survey visit and an itemised written quote.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.