Cooker hood installation in Chichester

Is cooker hood installation right for your Chichester kitchen?

Cooks across West Sussex who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.

A new kitchen in a Chichester home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together. Chichester sits about 32 miles south-west of Crawley, and our West Sussex coverage takes in everything in between.

What does cooker hood installation in Chichester include?

After the survey visit we write the scope down. For cooker hood installation in Chichester it usually covers:

Hood fixed at the height set by the hood and hob manufacturers
Survey of the hob position, duct route, outside wall and any open-flued appliance
Core drilling through the outside wall and an external grille fitted and sealed
Island and ceiling hoods fixed into the ceiling structure by two people
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Recirculating hoods fitted with carbon filters, and their limits explained

What does cooker hood installation cost in Chichester?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does cooker hood installation cost in Chichester?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Chichester?

The housing mix across West Sussex includes 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows, so no two kitchen fits are quite alike. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

Regulations for kitchen work in Chichester

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Before you book cooker hood installation in Chichester

Before choosing a hood for your Chichester kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
If you live in a flat in West Sussex, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.

Questions about cooker hood installation in Chichester

How much does cooker hood installation cost in Chichester?

Cooker hood installation in Chichester typically costs £140 to £280 including VAT for a like-for-like cooker hood swap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Chichester before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Chichester. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation in neighbouring towns

Neighbouring towns where we offer cooker hood installation: