Fit-only kitchen fitting in Chichester

What prompts fit-only kitchen fitting in Chichester?

People in West Sussex who have bought from a trade counter often want a fitter who will check the plan against the room before any boxes are opened.

Some Chichester households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start. We cover all of Chichester, including the PO19 postcode district, and travel out to neighbouring towns across West Sussex.

What is included in the work?

Your written quote lists everything included. For fit-only kitchen fitting, that normally means:

Laminate or wood worktops cut, jointed, sealed and fixed down
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Delivery checked against the plan and delivery note before fitting starts
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Packaging and offcuts cleared, with removal of the old kitchen available as an extra

What should you budget for fit-only kitchen fitting in Chichester?

The figures below are guide prices for Chichester, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for fit-only kitchen fitting in Chichester?
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,700–£2,900
Medium kitchen (10–15 units)As above	£2,900–£4,000
Large kitchen (15+ units, island or tall larders)As above	£4,000–£5,200
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£210–£320 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Local homes and their kitchens

Across West Sussex you will often find 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows, and each shapes the kitchen differently. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

Do you need approval for fit-only kitchen fitting in Chichester?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Planning ahead

Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Chichester kitchen.
Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.

Questions about fit-only kitchen fitting in Chichester

How much does fit-only kitchen fitting cost in Chichester?

For a small kitchen of 5 to 10 units, budget around £1,700 to £2,900 including VAT in Chichester. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Can you measure up in Chichester before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Chichester. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Fit-only kitchen fitting near Chichester

Neighbouring towns where we offer fit-only kitchen fitting: