Cooker hood installation in Midhurst

When does cooker hood installation make sense in Midhurst?

Cooks across West Sussex who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.

Homeowners in Midhurst adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up. We cover all of Midhurst, including the GU29 postcode district, and travel out to neighbouring towns across West Sussex.

What we cover for cooker hood installation in Midhurst

Your written quote lists everything included. For cooker hood installation, that normally means:

Power supply connected by an electrician and tested to BS 7671
Island and ceiling hoods fixed into the ceiling structure by two people
Recirculating hoods fitted with carbon filters, and their limits explained
Survey of the hob position, duct route, outside wall and any open-flued appliance
Core drilling through the outside wall and an external grille fitted and sealed
Hood fixed at the height set by the hood and hob manufacturers

What should you budget for cooker hood installation in Midhurst?

The figures below are guide prices for Midhurst, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for cooker hood installation in Midhurst?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Midhurst?

The housing mix across West Sussex includes 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows, so no two kitchen fits are quite alike. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

Do you need approval for cooker hood installation in Midhurst?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Tips before you start

Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
Before choosing a hood for your Midhurst kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Midhurst

How much does cooker hood installation cost in Midhurst?

For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in Midhurst. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Which parts of Midhurst do you work in?

All of them. Our West Sussex coverage takes in the whole of Midhurst, including the GU29 postcode district, as well as surrounding towns such as Petersfield. If you are unsure, send us your postcode.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Cooker hood installation near Midhurst

We also carry out cooker hood installation in these towns near Midhurst: