Cooker hood installation in Tenterden

Why cooker hood installation for a Tenterden home?

Homeowners in Tenterden adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

A new kitchen in a Tenterden home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together. Kitchens in every part of Tenterden are covered, and the survey visit is free wherever you are in Kent.

What does cooker hood installation in Tenterden include?

The exact scope is agreed after the survey, but a typical job in Tenterden covers:

Recirculating hoods fitted with carbon filters, and their limits explained
Survey of the hob position, duct route, outside wall and any open-flued appliance
Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed
Power supply connected by an electrician and tested to BS 7671
Short, straight runs of rigid ducting wherever the route allows

Cooker hood installation prices in Tenterden

As a starting point for Tenterden, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Cooker hood installation prices in Tenterden
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Tenterden

Typical homes in this part of Kent include Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Regulations for kitchen work in Tenterden

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Tips before you start

Before choosing a hood for your Tenterden kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
For an island hood in your Tenterden kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
If your Tenterden home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Tenterden

How much does cooker hood installation cost in Tenterden?

Cooker hood installation in Tenterden typically costs £140 to £280 including VAT for a like-for-like cooker hood swap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Tenterden as well?

Yes. As well as Tenterden itself, we cover the rest of Kent and nearby towns such as Rye and Ashford, Kent. The process is the same wherever the kitchen is.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Nearby places we cover

Neighbouring towns where we offer cooker hood installation: