Utility room fitting in Wilmslow

Is utility room fitting right for your Wilmslow kitchen?

Larger households in Wilmslow sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.

In a Wilmslow house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall. If your home is in Wilmslow or close by in Cheadle Hulme or Hazel Grove, the same survey, quote and fitting process applies.

What we cover for utility room fitting in Wilmslow

After the survey visit we write the scope down. For utility room fitting in Wilmslow it usually covers:

Washing machine supply, waste and isolation valve, tested for leaks
Extract fan fitted to clear moisture from washing and drying
A vent to outside for a vented dryer, or a drain hose for condenser models
Utility sink and tap plumbed in, with new supplies and waste where none exist
Free survey visit to check water, waste, power and outside wall positions
Base, wall and tall units fitted, levelled and fixed to the wall

What should you budget for utility room fitting in Wilmslow?

The figures below are guide prices for Wilmslow, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

What should you budget for utility room fitting in Wilmslow?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,800–£6,600
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£380–£950

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Wilmslow homes

Across Cheshire you will often find Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages, and each shapes the kitchen differently. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door. Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap.

Regulations for kitchen work in Wilmslow

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Before you book utility room fitting in Wilmslow

Before choosing a dryer for your Wilmslow utility, check whether there is an outside wall close enough for a short, straight vent duct.
In a Wilmslow flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.

Questions about utility room fitting in Wilmslow

How much does utility room fitting cost in Wilmslow?

Utility room fitting in Wilmslow typically costs £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Wilmslow as well?

Yes. As well as Wilmslow itself, we cover the rest of Cheshire and nearby towns such as Cheadle Hulme and Hazel Grove. The process is the same wherever the kitchen is.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Utility room fitting in neighbouring towns

We also carry out utility room fitting in these towns near Wilmslow: