Kitchen Installers UK

Utility room fitting · Greater Manchester

Utility room fitting in Hazel Grove

Homeowners and landlords in Hazel Grove can book us for utility room fitting: utility rooms fitted with units, a sink, washer and dryer connections and a worktop over the appliances.

Guide price£380 to £6,600
Postcodes includeSK7
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Is utility room fitting right for your Hazel Grove kitchen?

Larger households in Hazel Grove sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.

If your Hazel Grove home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility. We cover all of Hazel Grove, including the SK7 postcode district, and travel out to neighbouring towns across Greater Manchester.

What does utility room fitting in Hazel Grove include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Stacking kit fitted where the washer and dryer sit one above the other
  • Extract fan fitted to clear moisture from washing and drying
  • Free survey visit to check water, waste, power and outside wall positions
  • Utility sink and tap plumbed in, with new supplies and waste where none exist
  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Base, wall and tall units fitted, levelled and fixed to the wall

Utility room fitting prices in Hazel Grove

As a starting point for Hazel Grove, these ranges include VAT at 20% and allow for typical labour costs in the North West. Costs across the North West tend to sit under UK averages, which these ranges reflect.

Utility room fitting prices in Hazel Grove
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£2,800–£6,600
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£380–£950

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Hazel Grove

Typical homes in this part of Greater Manchester include Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.

Do you need approval for utility room fitting in Hazel Grove?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Worth knowing before the fit

  • Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
  • Before choosing a dryer for your Hazel Grove utility, check whether there is an outside wall close enough for a short, straight vent duct.
  • Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
  • A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.

Questions about utility room fitting in Hazel Grove

How much does utility room fitting cost in Hazel Grove?

Utility room fitting in Hazel Grove typically costs £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Hazel Grove before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Hazel Grove. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Utility room fitting near Hazel Grove

We also carry out utility room fitting in these towns near Hazel Grove:

Combine utility room fitting with other work

Free survey visit

Book a free survey visit in Hazel Grove

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price