Utility room fitting · Leicestershire
Utility room fitting in Wigston
We take on utility room fitting in Wigston and the surrounding LE18 postcodes, working to a written scope so you know exactly what is included before anyone starts.
Is utility room fitting right for your Wigston kitchen?
Dog owners and keen walkers around Wigston often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.
Families in Wigston often want the washing machine out of the kitchen, so the noise, the wet laundry and the drying racks have a room of their own. Homes right across Wigston are covered, as are nearby places such as Oadby, Leicester and the villages in between.
What we cover for utility room fitting in Wigston
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Worktop over the washing machine and dryer, supported clear of the appliances
- Stacking kit fitted where the washer and dryer sit one above the other
- Washing machine supply, waste and isolation valve, tested for leaks
- Utility sink and tap plumbed in, with new supplies and waste where none exist
How much does utility room fitting cost in Wigston?
Use these ranges to plan your budget. They include VAT, reflect costs in the East Midlands, and are firmed up once we have seen your Wigston kitchen. Costs in the East Midlands sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,200–£2,900 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £2,900–£6,800 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £390–£970 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Local homes and their kitchens
The housing mix across Leicestershire includes Victorian terraces, 1930s semis, post-war estate houses and new-build estates, so no two kitchen fits are quite alike. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.
Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help. Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early.
Building regulations, electrics and gas in Wigston
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.
Practical advice for Wigston homeowners
- Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
- Before choosing a dryer for your Wigston utility, check whether there is an outside wall close enough for a short, straight vent duct.
- If your Leicestershire home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
- A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.
Questions about utility room fitting in Wigston
How much does utility room fitting cost in Wigston?
Utility room fitting in Wigston typically costs £1,200 to £2,900 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you work near Wigston as well?
Yes. As well as Wigston itself, we cover the rest of Leicestershire and nearby towns such as Oadby and Leicester. The process is the same wherever the kitchen is.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Utility room fitting in neighbouring towns
We also carry out utility room fitting in these towns near Wigston:
- Utility room fitting in Oadby
- Utility room fitting in Leicester
- Utility room fitting in Humberstone
- Utility room fitting in Earl Shilton
- Utility room fitting in Lutterworth
- Utility room fitting in Market Harborough
- Utility room fitting across Leicestershire