Utility room fitting · Greater Manchester
Utility room fitting in Stalybridge
If you live in Stalybridge and need utility room fitting, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Is utility room fitting right for your Stalybridge kitchen?
Landlords letting larger family homes across Greater Manchester sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances.
Families in Stalybridge often want the washing machine out of the kitchen, so the noise, the wet laundry and the drying racks have a room of their own. Our Greater Manchester coverage reaches every part of Stalybridge (SK15) and out towards Dukinfield.
What we cover for utility room fitting in Stalybridge
The exact scope is agreed after the survey, but a typical job in Stalybridge covers:
- Washing machine supply, waste and isolation valve, tested for leaks
- Extract fan fitted to clear moisture from washing and drying
- Base, wall and tall units fitted, levelled and fixed to the wall
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Free survey visit to check water, waste, power and outside wall positions
What does utility room fitting cost in Stalybridge?
The figures below are guide prices for Stalybridge, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,100–£2,800 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £2,800–£6,600 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £380–£950 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
What kind of kitchens do we fit in Stalybridge?
The housing mix across Greater Manchester includes Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, so no two kitchen fits are quite alike. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.
Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.
Regulations for kitchen work in Stalybridge
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.
Tips before you start
- In a Stalybridge flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
- Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
- Plan the sockets in your Stalybridge utility so each appliance can be switched off at an accessible switch without moving the machine.
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
Questions about utility room fitting in Stalybridge
How much does utility room fitting cost in Stalybridge?
Guide prices in Stalybridge are about £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Can you measure up in Stalybridge before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Stalybridge. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Utility room fitting near Stalybridge
The same service is available a short drive from Stalybridge, including:
- Utility room fitting in Dukinfield
- Utility room fitting in Ashton-under-Lyne
- Utility room fitting in Hyde
- Utility room fitting in Denton
- Utility room fitting in Droylsden
- Utility room fitting in Oldham
- Utility room fitting across Greater Manchester
