Kitchen Installers UK

Utility room fitting · Wiltshire

Utility room fitting in Salisbury

Utility room fitting for Salisbury homes: utility rooms fitted with units, a sink, washer and dryer connections and a worktop over the appliances. Every job starts with a free survey visit and a written quote.

Guide price£410 to £7,200
Postcodes includeSP1
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Thinking about utility room fitting in Salisbury?

Landlords letting larger family homes across Wiltshire sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances.

When a new kitchen is being planned in Wiltshire, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself. Kitchens in every part of Salisbury are covered, and the survey visit is free wherever you are in Wiltshire.

What we cover for utility room fitting in Salisbury

The exact scope is agreed after the survey, but a typical job in Salisbury covers:

  • Utility sink and tap plumbed in, with new supplies and waste where none exist
  • Washing machine supply, waste and isolation valve, tested for leaks
  • Stacking kit fitted where the washer and dryer sit one above the other
  • Free survey visit to check water, waste, power and outside wall positions
  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Worktop over the washing machine and dryer, supported clear of the appliances

What does utility room fitting cost in Salisbury?

The figures below are guide prices for Salisbury, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Prices across the South West are broadly in line with UK averages.

What does utility room fitting cost in Salisbury?
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,200–£3,100
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£3,100–£7,200
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£410–£1,000

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Local homes and their kitchens

In and around Salisbury, homes range across thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance. Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help.

Do you need approval for utility room fitting in Salisbury?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Before you book utility room fitting in Salisbury

  • Plan the sockets in your Salisbury utility so each appliance can be switched off at an accessible switch without moving the machine.
  • Before choosing a dryer for your Salisbury utility, check whether there is an outside wall close enough for a short, straight vent duct.
  • Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
  • A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.

Questions about utility room fitting in Salisbury

How much does utility room fitting cost in Salisbury?

Utility room fitting in Salisbury typically costs £1,200 to £3,100 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Salisbury before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Salisbury. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Utility room fitting near Salisbury

We also carry out utility room fitting in these towns near Salisbury:

More services for Salisbury kitchens

Free survey visit

Book a free survey visit in Salisbury

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price