Kitchen Installers UK

Utility room fitting · Mid Glamorgan

Utility room fitting in Porthcawl

If you live in Porthcawl and need utility room fitting, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Guide price£370 to £6,400
Postcodes includeCF36
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Why do people in Porthcawl choose utility room fitting?

Larger households in Porthcawl sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.

If the kitchen in your Mid Glamorgan home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage. We cover all of Porthcawl, including the CF36 postcode district, and travel out to neighbouring towns across Mid Glamorgan.

What does utility room fitting in Porthcawl include?

Your written quote lists everything included. For utility room fitting, that normally means:

  • Free survey visit to check water, waste, power and outside wall positions
  • Stacking kit fitted where the washer and dryer sit one above the other
  • Base, wall and tall units fitted, levelled and fixed to the wall
  • Washing machine supply, waste and isolation valve, tested for leaks
  • Utility sink and tap plumbed in, with new supplies and waste where none exist
  • Worktop over the washing machine and dryer, supported clear of the appliances

What does utility room fitting cost in Porthcawl?

As a starting point for Porthcawl, these ranges include VAT at 20% and allow for typical labour costs in Wales. Labour rates in Wales are generally lower than in London and the South East, so these ranges are a little below the national guide.

What does utility room fitting cost in Porthcawl?
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£2,800–£6,400
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£370–£920

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Porthcawl

Typical homes in this part of Mid Glamorgan include valley terraces, post-war council-built houses, seaside bungalows and new-build estates. Valley terraces often have a narrow kitchen in a rear extension, while post-war houses in towns such as Bridgend tend to have a compact room beside the dining area.

Steep valley streets and terraces built into hillsides can mean steps, tight turns and limited parking, so carrying long worktops is planned at the survey. Soft water is usual across Mid Glamorgan, so limescale is less of a concern and taps and boiling water taps tend to stay cleaner.

Do you need approval for utility room fitting in Porthcawl?

In Wales, a utility room needs no planning permission; a listed building may need listed building consent, and a new vent through the outside wall of a flat may need planning permission. New circuits are notifiable under Part P, and so is extending a circuit within a kitchen, which covers a utility area that is part of the kitchen itself. The Welsh Approved Document F sets an extract rate for utility rooms, so a new fan should be sized to meet it, and a Gas Safe registered engineer should spillage-test any open-flued boiler in the room after a fan goes in.

The northern fringe of the area falls within Bannau Brycheiniog National Park, and listed buildings or conservation areas may need consent for new external vents.

Practical advice for Porthcawl homeowners

  • Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
  • In a Porthcawl flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
  • Before choosing a dryer for your Porthcawl utility, check whether there is an outside wall close enough for a short, straight vent duct.
  • Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Porthcawl

How much does utility room fitting cost in Porthcawl?

Guide prices in Porthcawl are about £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Porthcawl do you work in?

All of them. Our Mid Glamorgan coverage takes in the whole of Porthcawl, including the CF36 postcode district, as well as surrounding towns such as Bridgend. If you are unsure, send us your postcode.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Utility room fitting in neighbouring towns

We also carry out utility room fitting in these towns near Porthcawl:

More services for Porthcawl kitchens

Free survey visit

Book a free survey visit in Porthcawl

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price