Utility room fitting in Bridgend

When does utility room fitting make sense in Bridgend?

Larger households in Bridgend sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.

Landlords letting larger family homes across Mid Glamorgan sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. Homes right across Bridgend are covered, as are nearby places such as Porthcawl, Maesteg and the villages in between.

What does the job involve?

Here is what usually goes into utility room fitting, adjusted to your Bridgend kitchen after we have measured it:

Stacking kit fitted where the washer and dryer sit one above the other
Utility sink and tap plumbed in, with new supplies and waste where none exist
Free survey visit to check water, waste, power and outside wall positions
A vent to outside for a vented dryer, or a drain hose for condenser models
Worktop over the washing machine and dryer, supported clear of the appliances
Base, wall and tall units fitted, levelled and fixed to the wall

What should you budget for utility room fitting in Bridgend?

Use these ranges to plan your budget. They include VAT, reflect costs in Wales, and are firmed up once we have seen your Bridgend kitchen. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for utility room fitting in Bridgend?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,800–£6,400
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£370–£920

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Bridgend?

Across Mid Glamorgan you will often find valley terraces, post-war council-built houses, seaside bungalows and new-build estates, and each shapes the kitchen differently. Valley terraces often have a narrow kitchen in a rear extension, while post-war houses in towns such as Bridgend tend to have a compact room beside the dining area.

Steep valley streets and terraces built into hillsides can mean steps, tight turns and limited parking, so carrying long worktops is planned at the survey. Soft water is usual across Mid Glamorgan, so limescale is less of a concern and taps and boiling water taps tend to stay cleaner.

Building regulations, electrics and gas in Bridgend

In Wales, a utility room needs no planning permission; a listed building may need listed building consent, and a new vent through the outside wall of a flat may need planning permission. New circuits are notifiable under Part P, and so is extending a circuit within a kitchen, which covers a utility area that is part of the kitchen itself. The Welsh Approved Document F sets an extract rate for utility rooms, so a new fan should be sized to meet it, and a Gas Safe registered engineer should spillage-test any open-flued boiler in the room after a fan goes in.

The northern fringe of the area falls within Bannau Brycheiniog National Park, and listed buildings or conservation areas may need consent for new external vents.

Getting the most from your utility room fitting

Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
In a Bridgend flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
If your Mid Glamorgan home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Bridgend

How much does utility room fitting cost in Bridgend?

Guide prices in Bridgend are about £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Bridgend do you work in?

All of them. Our Mid Glamorgan coverage takes in the whole of Bridgend, including the CF31 postcode district, as well as surrounding towns such as Porthcawl. If you are unsure, send us your postcode.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Also covering nearby towns

We also carry out utility room fitting in these towns near Bridgend: