Utility room fitting in Perth

When does utility room fitting make sense in Perth?

If the kitchen in your Perth and Kinross home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

Landlords letting larger family homes across Perth and Kinross sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. We work throughout Perth (PH1) and across the wider Perth and Kinross area.

What is in a typical job?

Here is what usually goes into utility room fitting, adjusted to your Perth kitchen after we have measured it:

Extract fan fitted to clear moisture from washing and drying
A vent to outside for a vented dryer, or a drain hose for condenser models
Stacking kit fitted where the washer and dryer sit one above the other
Base, wall and tall units fitted, levelled and fixed to the wall
Washing machine supply, waste and isolation valve, tested for leaks
Free survey visit to check water, waste, power and outside wall positions

Guide prices for utility room fitting in Perth

Typical utility room fitting prices for homes in Perth, including VAT and adjusted for Scotland. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs across Scotland tend to sit under UK averages, which these ranges reflect.

Guide prices for utility room fitting in Perth
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,800–£6,600
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£380–£940

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Perth

Across Perth and Kinross you will often find sandstone tenement flats, Victorian villas, stone cottages and post-war council-built houses, and each shapes the kitchen differently. Victorian villas in Perth and Crieff often have a separate kitchen and former scullery, while tenement flats tend to have a small kitchen off the hall.

Highland Perthshire roads can be narrow and winding, and older town streets may have limited parking, so delivery vehicle size and timing are planned ahead. Mains water across Perth and Kinross is soft, though some remote homes rely on private supplies that may need testing and filtering.

Building regulations, electrics and gas in Perth

In Scotland, fitting utility units, plumbing in appliances and adding an extractor fan do not normally need a building warrant, but the electrics must meet the building standards and BS 7671, so ask for an Electrical Installation Certificate. A new connection to an underground drain, for example from a utility in a garage, needs a warrant first. Where an open-flued boiler is in the room, a Gas Safe registered engineer should check its flue with a spillage test after a fan is fitted.

Parts of highland Perthshire lie within the Cairngorms or Loch Lomond and The Trossachs national parks, and listed buildings elsewhere may need consent for new vents.

Planning ahead

Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
If your Perth and Kinross home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Plan the sockets in your Perth utility so each appliance can be switched off at an accessible switch without moving the machine.
Under-stairs spaces can take a washer and dryer, but check the headroom, the ventilation and room to pull machines out before committing.

Questions about utility room fitting in Perth

How much does utility room fitting cost in Perth?

Utility room fitting in Perth typically costs £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Perth do you work in?

All of them. Our Perth and Kinross coverage takes in the whole of Perth, including the PH1 postcode district, as well as surrounding towns such as Crieff. If you are unsure, send us your postcode.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Utility room fitting in neighbouring towns

Neighbouring towns where we offer utility room fitting: