Utility room fitting · Cambridgeshire
Utility room fitting in Huntingdon
Whether your Huntingdon kitchen is a narrow galley or an open-plan room, utility room fitting follows the same careful order: survey, written scope, fit and a final check together.

Is utility room fitting right for your Huntingdon kitchen?
If the kitchen in your Cambridgeshire home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.
If your Huntingdon home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility. We cover all of Huntingdon, including the PE28 and PE29 postcode districts, and travel out to neighbouring towns across Cambridgeshire.
What is included in the work?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Worktop over the washing machine and dryer, supported clear of the appliances
- Washing machine supply, waste and isolation valve, tested for leaks
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Stacking kit fitted where the washer and dryer sit one above the other
- Utility sink and tap plumbed in, with new supplies and waste where none exist
What should you budget for utility room fitting in Huntingdon?
As a starting point for Huntingdon, these ranges include VAT at 20% and allow for typical labour costs in the East of England. Labour in the East of England generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,300–£3,200 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,200–£7,600 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £430–£1,100 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
House types around Huntingdon and what they mean for a kitchen
In and around Huntingdon, homes range across Victorian terraces, 1930s semis, post-war estate houses and fenland bungalows and farmhouses. Terraced houses in Cambridge and Peterborough often have a narrow galley at the back, while Fen bungalows tend to have a simple square kitchen beside the living room.
Fen roads and farm tracks can be narrow for delivery lorries, and city-centre terraces often have permit parking and no rear access for long worktops. Water across Cambridgeshire is very hard, so limescale on taps and boiling water taps is common and a filter or softener is worth thinking about.
What rules apply to utility room fitting in Huntingdon?
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Listed houses in historic centres such as Cambridge and Ely may need consent for internal changes or a new vent, although a straightforward kitchen fit needs no planning permission.
Worth knowing before the fit
- Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
- If the utility will be in the garage of your Huntingdon home, make sure the space stays above freezing in winter for the pipes and machines.
- Before choosing a dryer for your Huntingdon utility, check whether there is an outside wall close enough for a short, straight vent duct.
- Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.
Questions about utility room fitting in Huntingdon
How much does utility room fitting cost in Huntingdon?
Guide prices in Huntingdon are about £1,300 to £3,200 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover all of Huntingdon?
Yes. We work across Huntingdon, including the PE28 and PE29 postcode districts, and nearby towns such as St Neots and Sandy. Book a free survey visit and we will arrange a time that suits you.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Also covering nearby towns
We also carry out utility room fitting in these towns near Huntingdon:
- Utility room fitting in St Neots
- Utility room fitting in Sandy
- Utility room fitting in Cambridge
- Utility room fitting in Oundle
- Utility room fitting in Peterborough
- Utility room fitting in Biggleswade
- Utility room fitting across Cambridgeshire
