Utility room fitting · England
Utility room fitting in Cambridgeshire
Our utility room fitting work covers the whole of Cambridgeshire, including Peterborough, Cambridge and Wisbech.
When does utility room fitting make sense in Cambridgeshire?
When a new kitchen is being planned in Cambridgeshire, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.
If your Cambridgeshire home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility.
What does utility room fitting in Cambridgeshire include?
Your written quote lists everything included. For utility room fitting, that normally means:
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Worktop over the washing machine and dryer, supported clear of the appliances
- Washing machine supply, waste and isolation valve, tested for leaks
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Stacking kit fitted where the washer and dryer sit one above the other
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Extract fan fitted to clear moisture from washing and drying
How much does utility room fitting cost in Cambridgeshire?
Use these ranges to plan your budget. They include VAT, reflect costs in the East of England, and are firmed up once we have seen your Cambridgeshire kitchen. Labour in the East of England generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,300–£3,200 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,200–£7,600 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £430–£1,100 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Kitchens in homes across Cambridgeshire
The housing mix across Cambridgeshire includes Victorian terraces, 1930s semis, post-war estate houses and fenland bungalows and farmhouses, so no two kitchen fits are quite alike. Terraced houses in Cambridge and Peterborough often have a narrow galley at the back, while Fen bungalows tend to have a simple square kitchen beside the living room.
Water across Cambridgeshire is very hard, so limescale on taps and boiling water taps is common and a filter or softener is worth thinking about. Fen roads and farm tracks can be narrow for delivery lorries, and city-centre terraces often have permit parking and no rear access for long worktops.
Victorian terraces here often have a small rear kitchen, and opening it into the dining room is a common way to gain space. For a Fenland bungalow or farmhouse, the job may also involve levelling uneven floors and packing out walls before the units go in.
Rules for utility room fitting in Cambridgeshire
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Listed houses in historic centres such as Cambridge and Ely may need consent for internal changes or a new vent, although a straightforward kitchen fit needs no planning permission.
Before you start
- A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.
- Under-stairs spaces can take a washer and dryer, but check the headroom, the ventilation and room to pull machines out before committing.
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
- Check which dryer you have: a vented dryer needs a duct to an outside wall, while condenser and heat pump dryers need emptying or a drain.
- Plan the sockets in your Cambridgeshire utility so each appliance can be switched off at an accessible switch without moving the machine.
- Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
Questions about utility room fitting in Cambridgeshire
How much does utility room fitting cost in Cambridgeshire?
For fitting three to six utility units and a worktop you have bought, budget around £1,300 to £3,200 including VAT in Cambridgeshire. That reflects typical costs in the East of England; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Cambridgeshire?
Yes. We carry out utility room fitting across Cambridgeshire, including Peterborough, Cambridge, Wisbech and St Neots. Every job starts with a free survey visit and an itemised written quote.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Utility room fitting in towns across Cambridgeshire
Choose a town for local guide prices and postcode coverage:
- Utility room fitting in Peterborough
- Utility room fitting in Cambridge
- Utility room fitting in Wisbech
- Utility room fitting in St Neots
- Utility room fitting in Huntingdon
- Utility room fitting in March
- Utility room fitting in Ely