Utility room fitting · Greater London
Utility room fitting in Hounslow
Homeowners and landlords in Hounslow can book us for utility room fitting: utility rooms fitted with units, a sink, washer and dryer connections and a worktop over the appliances.
Why do people in Hounslow choose utility room fitting?
Larger households in Hounslow sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.
Landlords letting larger family homes across Greater London sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. Our Greater London coverage reaches every part of Hounslow (TW3, TW4 and TW6) and out towards Isleworth.
What does the job involve?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Base, wall and tall units fitted, levelled and fixed to the wall
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Worktop over the washing machine and dryer, supported clear of the appliances
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Free survey visit to check water, waste, power and outside wall positions
- Washing machine supply, waste and isolation valve, tested for leaks
How much does utility room fitting cost in Hounslow?
Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Hounslow kitchen. Labour in London generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,600–£3,900 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,900–£9,100 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £520–£1,300 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Kitchens in homes around Hounslow
Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.
Building regulations, electrics and gas in Hounslow
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Practical advice for Hounslow homeowners
- Before choosing a dryer for your Hounslow utility, check whether there is an outside wall close enough for a short, straight vent duct.
- Plan the sockets in your Hounslow utility so each appliance can be switched off at an accessible switch without moving the machine.
- In a Hounslow flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
Questions about utility room fitting in Hounslow
How much does utility room fitting cost in Hounslow?
Guide prices in Hounslow are about £1,600 to £3,900 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Can you measure up in Hounslow before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Hounslow. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Utility room fitting near Hounslow
We also carry out utility room fitting in these towns near Hounslow:
- Utility room fitting in Isleworth
- Utility room fitting in Heston
- Utility room fitting in Richmond, Greater London
- Utility room fitting in Hanworth
- Utility room fitting in Feltham
- Utility room fitting in Southall
- Utility room fitting across Greater London