Utility room fitting in Hampton

Is utility room fitting right for your Hampton kitchen?

Landlords letting larger family homes across Greater London sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances.

Families in Hampton often want the washing machine out of the kitchen, so the noise, the wet laundry and the drying racks have a room of their own. Homes right across Hampton are covered, as are nearby places such as West Molesey, East Molesey and the villages in between.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Worktop over the washing machine and dryer, supported clear of the appliances
Washing machine supply, waste and isolation valve, tested for leaks
A vent to outside for a vented dryer, or a drain hose for condenser models
Free survey visit to check water, waste, power and outside wall positions
Utility sink and tap plumbed in, with new supplies and waste where none exist
Base, wall and tall units fitted, levelled and fixed to the wall

What should you budget for utility room fitting in Hampton?

As a starting point for Hampton, these ranges include VAT at 20% and allow for typical labour costs in London. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What should you budget for utility room fitting in Hampton?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,600–£3,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,900–£9,100
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£520–£1,300

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Hampton

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Hampton

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

If the utility will be in the garage of your Hampton home, make sure the space stays above freezing in winter for the pipes and machines.
In a Hampton flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
If your Greater London home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Hampton

How much does utility room fitting cost in Hampton?

Guide prices in Hampton are about £1,600 to £3,900 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Hampton as well?

Yes. As well as Hampton itself, we cover the rest of Greater London and nearby towns such as West Molesey and East Molesey. The process is the same wherever the kitchen is.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Also covering nearby towns

Neighbouring towns where we offer utility room fitting: