Utility room fitting in Dunoon

Why utility room fitting for a Dunoon home?

Dog owners and keen walkers around Dunoon often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.

Larger households in Dunoon sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. Our Argyll and Bute coverage reaches every part of Dunoon (PA23) and out towards Oban.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Dunoon covers:

Utility sink and tap plumbed in, with new supplies and waste where none exist
Extract fan fitted to clear moisture from washing and drying
Free survey visit to check water, waste, power and outside wall positions
Stacking kit fitted where the washer and dryer sit one above the other
A vent to outside for a vented dryer, or a drain hose for condenser models
Base, wall and tall units fitted, levelled and fixed to the wall

Utility room fitting prices in Dunoon

Typical utility room fitting prices for homes in Dunoon, including VAT and adjusted for Scotland. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.

Utility room fitting prices in Dunoon
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,800–£6,600
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£380–£940

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Dunoon?

Typical homes in this part of Argyll and Bute include Victorian villas, whitewashed cottages, tenement flats and post-war bungalows. Victorian villas in Dunoon and Oban often have a separate scullery and a larger kitchen, while cottages and bungalows tend to have a compact room at the back.

Soft water is usual across Argyll and Bute, so limescale is rarely a concern, though rural homes on private supplies may need their own filtering. Long single-track roads are common, and some mainland addresses are quickest reached by ferry, so delivery dates, vehicle size and worktop lengths need planning around timetables and weather.

Do you need approval for utility room fitting in Dunoon?

In Scotland, fitting utility units, plumbing in appliances and adding an extractor fan do not normally need a building warrant, but the electrics must meet the building standards and BS 7671, so ask for an Electrical Installation Certificate. A new connection to an underground drain, for example from a utility in a garage, needs a warrant first. Where an open-flued boiler is in the room, a Gas Safe registered engineer should check its flue with a spillage test after a fan is fitted.

Parts of Cowal lie within Loch Lomond and The Trossachs National Park, and listed buildings or conservation areas may need consent for a new external vent.

Planning ahead

If the utility will be in the garage of your Dunoon home, make sure the space stays above freezing in winter for the pipes and machines.
Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
Before choosing a dryer for your Dunoon utility, check whether there is an outside wall close enough for a short, straight vent duct.
If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Dunoon

How much does utility room fitting cost in Dunoon?

Guide prices in Dunoon are about £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Dunoon do you work in?

All of them. Our Argyll and Bute coverage takes in the whole of Dunoon, including the PA23 postcode district, as well as surrounding towns such as Oban. If you are unsure, send us your postcode.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Also covering nearby towns

We also carry out utility room fitting in these towns near Dunoon: