Kitchen worktop fitting · Argyll and Bute
Kitchen worktop fitting in Dunoon
Kitchen worktop fitting for Dunoon homes: laminate, solid wood, quartz and granite worktops fitted or templated, with joints, cut-outs and upstands. Every job starts with a free survey visit and a written quote.
Why kitchen worktop fitting for a Dunoon home?
Some homeowners across Argyll and Bute have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead.
If your Argyll and Bute kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time. Our Argyll and Bute coverage reaches every part of Dunoon (PA23) and out towards Oban.
What is included in the work?
Your written quote lists everything included. For kitchen worktop fitting, that normally means:
- Matching upstands fitted and the joint to the wall sealed
- Undermount sink and hob cut-outs cut and finished by the stone fabricator
- Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
- Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
- Old worktops removed and taken away, with the sink and hob disconnected safely
- Free survey visit to measure the runs and check the base units are level
Kitchen worktop fitting prices in Dunoon
As a starting point for Dunoon, these ranges include VAT at 20% and allow for typical labour costs in Scotland. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands | £470–£1,100 |
| Solid wood worktops, supplied and fittedOiled before and after fitting | £850–£1,700 |
| Granite, templated and fittedTemplate visit, cutting, delivery and fitting | £1,400–£3,000 |
| Quartz, templated and fittedTemplate visit, cutting, delivery and fitting | £1,700–£3,300 |
| Old worktops removed and taken awayMore for stone | £80–£240 |
Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.
Local homes and their kitchens
Across Argyll and Bute you will often find Victorian villas, whitewashed cottages, tenement flats and post-war bungalows, and each shapes the kitchen differently. Victorian villas in Dunoon and Oban often have a separate scullery and a larger kitchen, while cottages and bungalows tend to have a compact room at the back.
Long single-track roads are common, and some mainland addresses are quickest reached by ferry, so delivery dates, vehicle size and worktop lengths need planning around timetables and weather. Soft water is usual across Argyll and Bute, so limescale is rarely a concern, though rural homes on private supplies may need their own filtering.
Regulations for kitchen work in Dunoon
In Scotland, replacing worktops counts as replacing fitments, so it does not need a building warrant. Any electrical changes, such as new sockets above the worktop, must meet the building standards and BS 7671, and you should ask for an electrical certificate. Gas hobs must be disconnected and reconnected by a Gas Safe registered engineer, and a sink needing a new underground drain connection would need a warrant first.
Parts of Cowal lie within Loch Lomond and The Trossachs National Park, and listed buildings or conservation areas may need consent for a new external vent.
Tips before you start
- Before templating day at your Dunoon home, make sure the sink, tap and hob are on site so the stone can be cut to them.
- Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
- Check that full-length worktops can get into your Dunoon home; long lengths need a clear, straight route through the front door and hall.
- Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.
Questions about kitchen worktop fitting in Dunoon
How much does kitchen worktop fitting cost in Dunoon?
Guide prices in Dunoon are about £470 to £1,100 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Can you measure up in Dunoon before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Dunoon. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Will you fit stone worktops I have ordered myself?
Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.
How do I look after a solid wood worktop?
Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.
Can I put hot pans on a quartz worktop?
It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.
Kitchen worktop fitting in neighbouring towns
The same service is available a short drive from Dunoon, including: