Kitchen Installers UK

Utility room fitting · Gwent

Utility room fitting in Caerphilly

Utility room fitting in Caerphilly starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

Guide price£370 to £6,400
Postcodes includeCF83
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Thinking about utility room fitting in Caerphilly?

When a new kitchen is being planned in Gwent, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.

In a Caerphilly house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall. Kitchens in every part of Caerphilly are covered, and the survey visit is free wherever you are in Gwent.

What is included in the work?

Your written quote lists everything included. For utility room fitting, that normally means:

  • Extract fan fitted to clear moisture from washing and drying
  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Washing machine supply, waste and isolation valve, tested for leaks
  • Utility sink and tap plumbed in, with new supplies and waste where none exist
  • Worktop over the washing machine and dryer, supported clear of the appliances
  • Stacking kit fitted where the washer and dryer sit one above the other

What should you budget for utility room fitting in Caerphilly?

The figures below are guide prices for Caerphilly, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for utility room fitting in Caerphilly?
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£2,800–£6,400
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£370–£920

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

House types around Caerphilly and what they mean for a kitchen

The housing mix across Gwent includes valley terraces, Victorian villas, post-war council-built houses and new-build estates, so no two kitchen fits are quite alike. Valley terraces often have a small kitchen in the rear extension, while Victorian villas in Newport and post-war houses in Cwmbran tend to have a separate kitchen and dining room.

Water across most of Gwent is soft to moderately soft, which is kinder to taps, though some areas are harder, so check with your supplier. Steep valley streets, terraces with steps up to the door and limited parking can make carrying long worktops difficult, so access is checked at the survey.

Building regulations, electrics and gas in Caerphilly

In Wales, a utility room needs no planning permission; a listed building may need listed building consent, and a new vent through the outside wall of a flat may need planning permission. New circuits are notifiable under Part P, and so is extending a circuit within a kitchen, which covers a utility area that is part of the kitchen itself. The Welsh Approved Document F sets an extract rate for utility rooms, so a new fan should be sized to meet it, and a Gas Safe registered engineer should spillage-test any open-flued boiler in the room after a fan goes in.

The northern edge of Gwent falls within Bannau Brycheiniog National Park, and listed buildings or conservation areas elsewhere may need consent for new external vents.

Getting the most from your utility room fitting

  • Before choosing a dryer for your Caerphilly utility, check whether there is an outside wall close enough for a short, straight vent duct.
  • Plan the sockets in your Caerphilly utility so each appliance can be switched off at an accessible switch without moving the machine.
  • If the utility will be in the garage of your Caerphilly home, make sure the space stays above freezing in winter for the pipes and machines.
  • If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Caerphilly

How much does utility room fitting cost in Caerphilly?

Guide prices in Caerphilly are about £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Caerphilly do you work in?

All of them. Our Gwent coverage takes in the whole of Caerphilly, including the CF83 postcode district, as well as surrounding towns such as Risca. If you are unsure, send us your postcode.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Utility room fitting in neighbouring towns

The same service is available a short drive from Caerphilly, including:

Planning more than one job in Caerphilly?

Free survey visit

Book a free survey visit in Caerphilly

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price