Utility room fitting in Antrim

Why do people in Antrim choose utility room fitting?

Larger households in Antrim sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.

Landlords letting larger family homes across County Antrim sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. If your home is in Antrim or close by in Ballymena or Newtownabbey, the same survey, quote and fitting process applies.

What we cover for utility room fitting in Antrim

The exact scope is agreed after the survey, but a typical job in Antrim covers:

Stacking kit fitted where the washer and dryer sit one above the other
Extract fan fitted to clear moisture from washing and drying
Utility sink and tap plumbed in, with new supplies and waste where none exist
Free survey visit to check water, waste, power and outside wall positions
Worktop over the washing machine and dryer, supported clear of the appliances
Base, wall and tall units fitted, levelled and fixed to the wall

Guide prices for utility room fitting in Antrim

Typical utility room fitting prices for homes in Antrim, including VAT and adjusted for Northern Ireland. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in Northern Ireland are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for utility room fitting in Antrim
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,100–£2,600
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,600–£6,200
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£350–£880

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Antrim

In and around Antrim, homes range across red-brick terraces, Victorian villas, post-war estate houses and rural bungalows. Red-brick terraces in Belfast often have a narrow kitchen in the return, while estate houses and rural bungalows tend to have a separate kitchen with room for a table.

Mains water across most of County Antrim is soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with entries at the back, city flats with booked lifts and country lanes can each affect deliveries, so the route for worktops is checked at the survey.

What rules apply to utility room fitting in Antrim?

In Northern Ireland, fitting a utility room in an existing space needs no planning permission or building control application. There is no notification scheme for domestic electrical work, but sockets and any new circuit should be installed and tested to BS 7671 and certified. New drainage connections go to council building control, Technical Booklet K covers ventilation, and a Gas Safe registered engineer should spillage-test any open-flued boiler after an extract fan is fitted.

Listed buildings and conservation areas in older parts of Belfast and the county towns may need consent for new vents, and apartment owners usually need management consent.

Planning ahead

Plan the sockets in your Antrim utility so each appliance can be switched off at an accessible switch without moving the machine.
If your County Antrim home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.

Questions about utility room fitting in Antrim

How much does utility room fitting cost in Antrim?

Utility room fitting in Antrim typically costs £1,100 to £2,600 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in Northern Ireland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Antrim do you work in?

All of them. Our County Antrim coverage takes in the whole of Antrim, including the BT41 postcode district, as well as surrounding towns such as Ballymena. If you are unsure, send us your postcode.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Utility room fitting near Antrim

Neighbouring towns where we offer utility room fitting: