Kitchen worktop fitting in Streatham

Why kitchen worktop fitting for a Streatham home?

Homeowners in Streatham with sound units but worn, chipped or swollen laminate often replace just the worktops, keeping the rest of the kitchen as it is.

Solid wood that has blackened around the sink and tap is a common reason people in Streatham ask about replacing their worktops with something new. We cover all of Streatham, including the SW16 postcode district, and travel out to neighbouring towns across Greater London.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Streatham covers:

Matching upstands fitted and the joint to the wall sealed
Old worktops removed and taken away, with the sink and hob disconnected safely
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Quartz, granite or sintered stone templated once the base units are fixed and level
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Undermount sink and hob cut-outs cut and finished by the stone fabricator

Guide prices for kitchen worktop fitting in Streatham

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Streatham kitchen. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for kitchen worktop fitting in Streatham
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£650–£1,600
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,200–£2,300
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£2,000–£4,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,300–£4,600
Old worktops removed and taken awayMore for stone	£100–£320

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

House types around Streatham and what they mean for a kitchen

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for kitchen worktop fitting in Streatham?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Check that full-length worktops can get into your Streatham home; long lengths need a clear, straight route through the front door and hall.
For a Streatham kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.

Questions about kitchen worktop fitting in Streatham

How much does kitchen worktop fitting cost in Streatham?

For laminate worktops, supplied and fitted, budget around £650 to £1,600 including VAT in Streatham. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Streatham as well?

Yes. As well as Streatham itself, we cover the rest of Greater London and nearby towns such as Norbury and Tooting. The process is the same wherever the kitchen is.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Nearby places we cover

Neighbouring towns where we offer kitchen worktop fitting: