Utility room fitting in Streatham

What prompts utility room fitting in Streatham?

Dog owners and keen walkers around Streatham often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.

Larger households in Streatham sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. Kitchens in every part of Streatham are covered, and the survey visit is free wherever you are in Greater London.

What is in a typical job?

After the survey visit we write the scope down. For utility room fitting in Streatham it usually covers:

Free survey visit to check water, waste, power and outside wall positions
Utility sink and tap plumbed in, with new supplies and waste where none exist
A vent to outside for a vented dryer, or a drain hose for condenser models
Extract fan fitted to clear moisture from washing and drying
Stacking kit fitted where the washer and dryer sit one above the other
Base, wall and tall units fitted, levelled and fixed to the wall

Utility room fitting prices in Streatham

As a starting point for Streatham, these ranges include VAT at 20% and allow for typical labour costs in London. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Utility room fitting prices in Streatham
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,600–£3,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,900–£9,100
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£520–£1,300

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

House types around Streatham and what they mean for a kitchen

In and around Streatham, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Streatham

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

If your Greater London home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.

Questions about utility room fitting in Streatham

How much does utility room fitting cost in Streatham?

Guide prices in Streatham are about £1,600 to £3,900 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Streatham?

Yes. We work across Streatham, including the SW16 postcode district, and nearby towns such as Norbury and Tooting. Book a free survey visit and we will arrange a time that suits you.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Utility room fitting near Streatham

The same service is available a short drive from Streatham, including: