Kitchen worktop fitting in Norwich

When does kitchen worktop fitting make sense in Norwich?

Some homeowners across Norfolk have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead.

Solid wood that has blackened around the sink and tap is a common reason people in Norwich ask about replacing their worktops with something new. Homes right across Norwich are covered, as are nearby places such as East Dereham, Beccles and the villages in between.

What we cover for kitchen worktop fitting in Norwich

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Matching upstands fitted and the joint to the wall sealed
Free survey visit to measure the runs and check the base units are level
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Quartz, granite or sintered stone templated once the base units are fixed and level

What does kitchen worktop fitting cost in Norwich?

The figures below are guide prices for Norwich, including VAT and adjusted for typical costs across the East of England. The fixed price comes after we have measured up. Expect costs in the East of England to sit somewhat above UK averages, reflecting local labour rates.

What does kitchen worktop fitting cost in Norwich?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£540–£1,300
Solid wood worktops, supplied and fittedOiled before and after fitting	£970–£1,900
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,600–£3,500
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,900–£3,800
Old worktops removed and taken awayMore for stone	£90–£270

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Norwich homes

In and around Norwich, homes range across flint and brick cottages, Victorian terraces, post-war bungalows and converted barns. Flint and brick cottages often have a small kitchen in a rear lean-to, while bungalows across the county usually have a square kitchen beside a separate dining room.

Norfolk's water is hard across most of the county, so limescale on taps and boiling water taps is common and a softener or filter can help. Rural roads, farm tracks and narrow coastal village streets can restrict delivery lorries, so long worktops may need a smaller vehicle or a planned drop-off.

Building regulations, electrics and gas in Norwich

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Homes within the Broads, listed cottages and conservation areas in market towns and coastal villages may need consent for a new external vent or alterations to historic features.

Worth knowing before the fit

If your Norwich kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
If your Norfolk home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Have the sink, tap and hob on site for templating, so the fabricator can cut the stone to the exact items you have bought.

Questions about kitchen worktop fitting in Norwich

How much does kitchen worktop fitting cost in Norwich?

Guide prices in Norwich are about £540 to £1,300 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Norwich do you work in?

All of them. Our Norfolk coverage takes in the whole of Norwich, including the NR2 and NR3 postcode districts, as well as surrounding towns such as East Dereham. If you are unsure, send us your postcode.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Kitchen worktop fitting in neighbouring towns

Close to Norwich? We cover these nearby towns too: