Kitchen worktop fitting in Melton Mowbray

What prompts kitchen worktop fitting in Melton Mowbray?

When a Melton Mowbray kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units.

Many people in Leicestershire choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template. If your home is in Melton Mowbray or close by in Oakham or Humberstone, the same survey, quote and fitting process applies.

What is in a typical job?

Here is what usually goes into kitchen worktop fitting, adjusted to your Melton Mowbray kitchen after we have measured it:

Old worktops removed and taken away, with the sink and hob disconnected safely
Matching upstands fitted and the joint to the wall sealed
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Quartz, granite or sintered stone templated once the base units are fixed and level
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Free survey visit to measure the runs and check the base units are level

Guide prices for kitchen worktop fitting in Melton Mowbray

These guide ranges include VAT at 20% and are adjusted for prices in the East Midlands. We confirm your price in writing after a free survey visit. Costs in the East Midlands sit close to the national guide.

Guide prices for kitchen worktop fitting in Melton Mowbray
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£480–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£870–£1,700
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,100
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,400
Old worktops removed and taken awayMore for stone	£80–£240

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Local homes and their kitchens

Across Leicestershire you will often find Victorian terraces, 1930s semis, post-war estate houses and new-build estates, and each shapes the kitchen differently. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help. Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early.

Building regulations, electrics and gas in Melton Mowbray

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Tips before you start

Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
Check that full-length worktops can get into your Melton Mowbray home; long lengths need a clear, straight route through the front door and hall.
Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.

Questions about kitchen worktop fitting in Melton Mowbray

How much does kitchen worktop fitting cost in Melton Mowbray?

Kitchen worktop fitting in Melton Mowbray typically costs £480 to £1,200 including VAT for laminate worktops, supplied and fitted, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Melton Mowbray do you work in?

All of them. Our Leicestershire coverage takes in the whole of Melton Mowbray, including the LE13 postcode district, as well as surrounding towns such as Oakham. If you are unsure, send us your postcode.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Also covering nearby towns

Neighbouring towns where we offer kitchen worktop fitting: