Kitchen worktop fitting in Leicester

Why kitchen worktop fitting for a Leicester home?

When a Leicester kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units.

Some homeowners across Leicestershire have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead. We work throughout Leicester (LE1 and LE19) and across the wider Leicestershire area.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Solid wood oiled before and after fitting and fixed to allow seasonal movement
Free survey visit to measure the runs and check the base units are level
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Matching upstands fitted and the joint to the wall sealed

Guide prices for kitchen worktop fitting in Leicester

The figures below are guide prices for Leicester, including VAT and adjusted for typical costs across the East Midlands. The fixed price comes after we have measured up. Costs in the East Midlands sit close to the national guide.

Guide prices for kitchen worktop fitting in Leicester
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£480–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£870–£1,700
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,100
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,400
Old worktops removed and taken awayMore for stone	£80–£240

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Leicester?

The housing mix across Leicestershire includes Victorian terraces, 1930s semis, post-war estate houses and new-build estates, so no two kitchen fits are quite alike. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early. Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help.

Regulations for kitchen work in Leicester

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Practical advice for Leicester homeowners

For a Leicester kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
If your Leicester kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Before templating day at your Leicester home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.

Questions about kitchen worktop fitting in Leicester

How much does kitchen worktop fitting cost in Leicester?

Kitchen worktop fitting in Leicester typically costs £480 to £1,200 including VAT for laminate worktops, supplied and fitted, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Leicester as well?

Yes. As well as Leicester itself, we cover the rest of Leicestershire and nearby towns such as Humberstone and Oadby. The process is the same wherever the kitchen is.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Kitchen worktop fitting near Leicester

Close to Leicester? We cover these nearby towns too: