Kitchen worktop fitting in Crawley

Why do people in Crawley choose kitchen worktop fitting?

Many people in West Sussex choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template.

If your West Sussex kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time. We cover all of Crawley, including the RH11 and RH77 postcode districts, and travel out to neighbouring towns across West Sussex.

What does kitchen worktop fitting in Crawley include?

Your written quote lists everything included. For kitchen worktop fitting, that normally means:

Undermount sink and hob cut-outs cut and finished by the stone fabricator
Matching upstands fitted and the joint to the wall sealed
Old worktops removed and taken away, with the sink and hob disconnected safely
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers

Guide prices for kitchen worktop fitting in Crawley

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for kitchen worktop fitting in Crawley
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Crawley?

In and around Crawley, homes range across 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey. West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering.

Do you need approval for kitchen worktop fitting in Crawley?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Before you book kitchen worktop fitting in Crawley

Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
For a Crawley kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Crawley

How much does kitchen worktop fitting cost in Crawley?

For laminate worktops, supplied and fitted, budget around £580 to £1,400 including VAT in Crawley. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Crawley?

Yes. We work across Crawley, including the RH11 and RH77 postcode districts, and nearby towns such as Horley and Horsham. Book a free survey visit and we will arrange a time that suits you.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Also covering nearby towns

Close to Crawley? We cover these nearby towns too: