Kitchen worktop fitting in Craigavon

Who usually needs kitchen worktop fitting in Craigavon?

Solid wood that has blackened around the sink and tap is a common reason people in Craigavon ask about replacing their worktops with something new.

If your County Armagh kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time. If your home is in Craigavon or close by in Portadown or Banbridge, the same survey, quote and fitting process applies.

What is included in the work?

Here is what usually goes into kitchen worktop fitting, adjusted to your Craigavon kitchen after we have measured it:

Free survey visit to measure the runs and check the base units are level
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Quartz, granite or sintered stone templated once the base units are fixed and level
Matching upstands fitted and the joint to the wall sealed
Old worktops removed and taken away, with the sink and hob disconnected safely

What should you budget for kitchen worktop fitting in Craigavon?

These guide ranges include VAT at 20% and are adjusted for prices in Northern Ireland. We confirm your price in writing after a free survey visit. Labour rates in Northern Ireland are generally lower than in London and the South East, so these ranges are a little below the national guide.

What should you budget for kitchen worktop fitting in Craigavon?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£440–£1,100
Solid wood worktops, supplied and fittedOiled before and after fitting	£790–£1,600
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,300–£2,800
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,600–£3,100
Old worktops removed and taken awayMore for stone	£70–£220

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Craigavon homes

Across County Armagh you will often find Georgian townhouses, red-brick terraces, new town houses and rural bungalows, and each shapes the kitchen differently. Georgian houses in Armagh often have kitchens in former back rooms, while new-town houses in Craigavon and rural bungalows tend to have compact rectangular kitchens.

Country lanes and farm entrances can be tight for delivery lorries, and older terraced streets may have limited parking, so delivery is planned ahead. Hardness in County Armagh depends on the source, from soft to moderately hard, so check with your water supplier before choosing a filter.

Do you need approval for kitchen worktop fitting in Craigavon?

In Northern Ireland, new worktops need no planning permission or building control application. Gas hobs must be disconnected and reconnected by a Gas Safe registered engineer, and any electrical changes should be installed and tested to BS 7671 and certified, even though there is no notification scheme for domestic electrical work. In a listed building, check before altering original fitted features, as listed building consent may be needed.

Armagh's Georgian centre is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.

Getting the most from your kitchen worktop fitting

Check that full-length worktops can get into your Craigavon home; long lengths need a clear, straight route through the front door and hall.
Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
Before templating day at your Craigavon home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.

Questions about kitchen worktop fitting in Craigavon

How much does kitchen worktop fitting cost in Craigavon?

For laminate worktops, supplied and fitted, budget around £440 to £1,100 including VAT in Craigavon. That reflects typical costs in Northern Ireland; we confirm the actual figure in writing once we have measured up.

Do you cover all of Craigavon?

Yes. We work across Craigavon, including the BT62, BT63, BT64, BT65, BT66 and BT67 postcode districts, and nearby towns such as Portadown and Banbridge. Book a free survey visit and we will arrange a time that suits you.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Nearby places we cover

Close to Craigavon? We cover these nearby towns too: