Kitchen worktop fitting in Bridport

Why do people in Bridport choose kitchen worktop fitting?

Many people in Dorset choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template.

Some homeowners across Dorset have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead. Our Dorset coverage reaches every part of Bridport (DT6) and out towards Chard.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old worktops removed and taken away, with the sink and hob disconnected safely
Matching upstands fitted and the joint to the wall sealed
Free survey visit to measure the runs and check the base units are level
Quartz, granite or sintered stone templated once the base units are fixed and level
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed

Guide prices for kitchen worktop fitting in Bridport

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Costs in the South West sit close to the national guide.

Guide prices for kitchen worktop fitting in Bridport
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£520–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£930–£1,900
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,300
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,900–£3,600
Old worktops removed and taken awayMore for stone	£80–£260

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Bridport?

Typical homes in this part of Dorset include thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult. Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help.

Building regulations, electrics and gas in Bridport

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Before you book kitchen worktop fitting in Bridport

If your Dorset home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
For a Bridport kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
If your Bridport kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Bridport

How much does kitchen worktop fitting cost in Bridport?

Guide prices in Bridport are about £520 to £1,200 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Bridport do you work in?

All of them. Our Dorset coverage takes in the whole of Bridport, including the DT6 postcode district, as well as surrounding towns such as Chard. If you are unsure, send us your postcode.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Also covering nearby towns

Neighbouring towns where we offer kitchen worktop fitting: