Kitchen worktop fitting in Brent

Why do people in Brent choose kitchen worktop fitting?

Some homeowners across Greater London have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead.

When a Brent kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units. We cover all of Brent, including the HA9 postcode district, and travel out to neighbouring towns across Greater London.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Brent covers:

Undermount sink and hob cut-outs cut and finished by the stone fabricator
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Free survey visit to measure the runs and check the base units are level
Matching upstands fitted and the joint to the wall sealed
Quartz, granite or sintered stone templated once the base units are fixed and level

Guide prices for kitchen worktop fitting in Brent

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for kitchen worktop fitting in Brent
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£650–£1,600
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,200–£2,300
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£2,000–£4,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,300–£4,600
Old worktops removed and taken awayMore for stone	£100–£320

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Brent?

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Brent

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
If your Brent kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Before templating day at your Brent home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.

Questions about kitchen worktop fitting in Brent

How much does kitchen worktop fitting cost in Brent?

Kitchen worktop fitting in Brent typically costs £650 to £1,600 including VAT for laminate worktops, supplied and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Brent as well?

Yes. As well as Brent itself, we cover the rest of Greater London and nearby towns such as Wembley and Sudbury, Greater London. The process is the same wherever the kitchen is.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Nearby places we cover

Close to Brent? We cover these nearby towns too: