Kitchen Installers UK

Kitchen underfloor heating · England

Kitchen underfloor heating in Wiltshire

Kitchen underfloor heating in Wiltshire starts with a free visit to measure up, then a written scope and quote before any work begins.

Guide price£260 to £4,100
Towns covered9 towns, including Swindon
Timescale1 to 2 days, then floor finishes once the screed or levelling has cured
An electric underfloor heating mat rolled out over insulation boards on a kitchen floor, ready to be tiled

Thinking about kitchen underfloor heating in Wiltshire?

Kitchen-diners across Wiltshire often have a large stretch of open floor, which can suit a wet system run from the existing boiler or heat pump.

If you are laying a new tiled floor in your Wiltshire kitchen anyway, that is the natural moment to put electric heating mats underneath it.

What does kitchen underfloor heating in Wiltshire include?

After the survey visit we write the scope down. For kitchen underfloor heating in Wiltshire it usually covers:

  • A survey of the subfloor, open floor area and existing heating system
  • A heating layout drawn to the kitchen plan, clear of units and appliances
  • Insulation boards so the floor responds more quickly when the heating comes on
  • Electric mats or cables, or wet pipework connected through a manifold
  • A new circuit or fused spur, plus a thermostat with a floor sensor
  • Screed, overlay boards or levelling compound, left to cure before finishes
  • Door thresholds and plinth heights checked against the new floor build-up
  • Plinth heaters fitted under base units where wall space for a radiator is short

How much does kitchen underfloor heating cost in Wiltshire?

As a starting point for Wiltshire, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.

How much does kitchen underfloor heating cost in Wiltshire?
Typical projectGuide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat£620–£1,500
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards£1,500–£4,100
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short£260–£620

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Kitchens in homes across Wiltshire

Across Wiltshire you will often find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates, and each shapes the kitchen differently. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help. Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance.

Railway terraces often have a narrow galley that owners open into the dining room to make a family kitchen. In a thatched or stone cottage, uneven walls and floors usually mean careful scribing, and cooker extraction needs extra thought where a vent cannot easily go through a thick or listed wall.

Rules for kitchen underfloor heating in Wiltshire

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Before you start

  • Insulation boards under an electric system help the floor warm up more quickly, especially when it is laid over a cold concrete slab.
  • Allow time for screed or levelling compound to cure before tiles or other finishes go down, as laying too soon risks cracks and lifting.
  • Check the new floor build-up height early; it affects door thresholds, plinth heights and whether integrated appliances still fit under the worktop.
  • Heat is laid only across the open floor, not under fitted units or appliances, so the heated area is smaller than the room.
  • Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Wiltshire kitchen.
  • Keep rugs light in your Wiltshire kitchen-diner; heavy rugs and thick mats hold heat in the floor instead of letting it warm the room.

Questions about kitchen underfloor heating in Wiltshire

How much does kitchen underfloor heating cost in Wiltshire?

For electric underfloor heating for a kitchen floor, budget around £620 to £1,500 including VAT in Wiltshire. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you cover the whole of Wiltshire?

Yes. We carry out kitchen underfloor heating across Wiltshire, including Swindon, Salisbury, Trowbridge and Chippenham. Every job starts with a free survey visit and an itemised written quote.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Kitchen underfloor heating in towns across Wiltshire

Choose a town for local guide prices and postcode coverage:

Kitchen underfloor heating in nearby areas

Free survey visit

Book a free survey visit in Wiltshire

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price