Kitchen strip-out and removal in Hythe, Hampshire

Who usually needs kitchen strip-out and removal in Hythe, Hampshire?

Some Hythe, Hampshire households are fitting a new kitchen themselves and want the heavy, messy part done by others, with gas capped and circuits made safe before they begin.

If a leak has ruined the base units in your Hythe, Hampshire kitchen, a careful strip-out lets the floor and walls dry out and be checked before anything new goes in. Homes right across Hythe, Hampshire are covered, as are nearby places such as Southampton, Totton and the villages in between.

What does kitchen strip-out and removal in Hythe, Hampshire include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Waste taken through licensed routes and old appliances sent for recycling
Old tiles stripped and walls prepared for plaster, where that is agreed
Water isolated and supplies capped so the rest of the house keeps running water
Gas supply disconnected and capped by a Gas Safe registered engineer
Floors, doorways, stairs and the route to the skip or van protected
Kitchen circuits isolated and made safe by an electrician

Guide prices for kitchen strip-out and removal in Hythe, Hampshire

Typical kitchen strip-out and removal prices for homes in Hythe, Hampshire, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for kitchen strip-out and removal in Hythe, Hampshire
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£230–£580
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£340–£800
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£580–£1,400

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

House types around Hythe, Hampshire and what they mean for a kitchen

The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

What rules apply to kitchen strip-out and removal in Hythe, Hampshire?

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Practical advice for Hythe, Hampshire homeowners

Empty every cupboard, the fridge and the freezer the day before the strip-out, and defrost the freezer so it can be carried out without leaking.
Set up a kettle and microwave in another room of your home in Hampshire, as the kitchen will have no power once the circuits are made safe.
Find your stopcock and gas meter before the day so the plumber and the Gas Safe engineer can isolate supplies in your Hythe, Hampshire home quickly.
Line up the new kitchen soon after the strip-out, as the room stays without a cooker or sink until the services are reconnected.

Questions about kitchen strip-out and removal in Hythe, Hampshire

How much does kitchen strip-out and removal cost in Hythe, Hampshire?

Kitchen strip-out and removal in Hythe, Hampshire typically costs £230 to £580 including VAT for removing and disposing of an old kitchen, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Hythe, Hampshire?

Yes. We work across Hythe, Hampshire, including the SO45 postcode district, and nearby towns such as Southampton and Totton. Book a free survey visit and we will arrange a time that suits you.

What happens if asbestos is found during a kitchen strip-out?

Work in that area stops. Homes built before 2000 may contain asbestos in textured ceiling coatings, old floor tiles, some boiler cupboard boards and the bitumen pads under old steel sinks. Suspect material is sampled and tested by a specialist, and if it does contain asbestos it is removed by a specialist contractor under the asbestos regulations before the strip-out carries on.

Can you strip out a kitchen for another fitter or builder?

Yes. We can take out the old kitchen on its own and leave the room ready, with gas capped, circuits made safe and water isolated, so your builder or fitter starts with a clear space. Tell us at the survey what condition the walls and floor should be left in, because stripping back to bare walls is a bigger job than removing units.

Do I need a skip for a kitchen strip-out?

Not always. A small kitchen can often go in a van in one or two trips, while a larger strip-out with tiles and plaster usually needs a skip. A skip on your drive needs no permit, but one on the road usually needs a permit from the council or roads authority, which the skip firm normally arranges. We agree the method at the survey.

Nearby places we cover

Close to Hythe, Hampshire? We cover these nearby towns too: