Kitchen strip-out and removal in Battersea

Why kitchen strip-out and removal for a Battersea home?

Homeowners in Battersea often book a strip-out on its own when a builder or another fitter is handling the new kitchen but nobody has planned how the old one comes out safely.

In a flat in Battersea, removing a kitchen means planning the route out through shared stairs or lifts, protecting common areas and keeping to the building's working hours. Our Greater London coverage reaches every part of Battersea (SW11) and out towards Chelsea.

What does kitchen strip-out and removal in Battersea include?

Here is what usually goes into kitchen strip-out and removal, adjusted to your Battersea kitchen after we have measured it:

Kitchen circuits isolated and made safe by an electrician
Survey of gas, electrical and water positions and the route out of the house
Waste taken through licensed routes and old appliances sent for recycling
Gas supply disconnected and capped by a Gas Safe registered engineer
Water isolated and supplies capped so the rest of the house keeps running water
Floors, doorways, stairs and the route to the skip or van protected

What should you budget for kitchen strip-out and removal in Battersea?

Typical kitchen strip-out and removal prices for homes in Battersea, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What should you budget for kitchen strip-out and removal in Battersea?
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£260–£650
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£390–£910
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£650–£1,600

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Battersea?

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Battersea

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

If you plan to sell or reuse appliances or units, say so at the survey so they are removed carefully and set aside rather than broken up.
Let neighbours in your Battersea terrace or block know when the strip-out is booked; it is a noisy day, and a van or skip may need parking space.
If your Battersea home was built before 2000, ask whether an asbestos survey makes sense before the strip-out date is fixed, rather than waiting to see what turns up.
Decide what is being kept, such as a working oven or units for a garage, and label it clearly before the strip-out day.

Questions about kitchen strip-out and removal in Battersea

How much does kitchen strip-out and removal cost in Battersea?

Kitchen strip-out and removal in Battersea typically costs £260 to £650 including VAT for removing and disposing of an old kitchen, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Battersea as well?

Yes. As well as Battersea itself, we cover the rest of Greater London and nearby towns such as Chelsea and Pimlico. The process is the same wherever the kitchen is.

Who disconnects the gas and electrics before a strip-out?

A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.

What happens if asbestos is found during a kitchen strip-out?

Work in that area stops. Homes built before 2000 may contain asbestos in textured ceiling coatings, old floor tiles, some boiler cupboard boards and the bitumen pads under old steel sinks. Suspect material is sampled and tested by a specialist, and if it does contain asbestos it is removed by a specialist contractor under the asbestos regulations before the strip-out carries on.

Do I need a skip for a kitchen strip-out?

Not always. A small kitchen can often go in a van in one or two trips, while a larger strip-out with tiles and plaster usually needs a skip. A skip on your drive needs no permit, but one on the road usually needs a permit from the council or roads authority, which the skip firm normally arranges. We agree the method at the survey.

Kitchen strip-out and removal near Battersea

Neighbouring towns where we offer kitchen strip-out and removal: