Splashbacks and tiling in Speke

Is splashbacks and tiling right for your Speke kitchen?

Many people in Merseyside choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

Landlords around Merseyside often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. We work throughout Speke (L24) and across the wider Merseyside area.

What is in a typical job?

Your written quote lists everything included. For splashbacks and tiling, that normally means:

Free survey visit to check the walls, agree the layout and give an itemised quote
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Socket and switch plates refitted by an electrician once the tiling is finished
Tiled splashbacks between the worktop and wall units, set out from a centre line

Guide prices for splashbacks and tiling in Speke

The figures below are guide prices for Speke, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for splashbacks and tiling in Speke
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Speke and what they mean for a kitchen

Typical homes in this part of Merseyside include Victorian terraces, Victorian and Edwardian villas, 1930s semis and converted warehouse flats. Two-up two-down terraces often have a small back kitchen off the living room, while 1930s semis tend to have a separate kitchen with space to open into a dining room.

Merseyside's mains water is soft, so limescale is rarely a big issue and taps, sinks and boiling water taps stay cleaner for longer. Terraced streets with back entries, city-centre flats with booked lifts and permit parking zones can all affect how and when a kitchen is delivered.

Do you need approval for splashbacks and tiling in Speke?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Conservation areas and listed buildings are common in older parts of Liverpool and the Wirral, so a new vent on a visible wall may need consent.

Getting the most from your splashbacks and tiling

Choosing stone worktops for a Speke kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
If you are renting out a flat in Speke, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Ask to see where the tiling will start before the first row goes on in your Speke kitchen, so narrow cut tiles end up in corners rather than on show.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Speke

How much do splashbacks and tiling cost in Speke?

Guide prices in Speke are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Speke as well?

Yes. As well as Speke itself, we cover the rest of Merseyside and nearby towns such as Halewood and Garston. The process is the same wherever the kitchen is.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Splashbacks and tiling in neighbouring towns

Neighbouring towns where we offer splashbacks and tiling: