Splashbacks and tiling in Halewood

Why do people in Halewood choose splashbacks and tiling?

Homeowners in Halewood often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

When a Halewood kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit. We work throughout Halewood (L26) and across the wider Merseyside area.

What does the job involve?

After the survey visit we write the scope down. For splashbacks and tiling in Halewood it usually covers:

Tiled splashbacks between the worktop and wall units, set out from a centre line
Free survey visit to check the walls, agree the layout and give an itemised quote
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Full-height or feature tiling behind the hob, sink or open shelving
Socket and switch plates refitted by an electrician once the tiling is finished
Old tiles removed and walls prepared, patched or boarded where needed

Splashbacks and tiling prices in Halewood

As a starting point for Halewood, these ranges include VAT at 20% and allow for typical labour costs in the North West. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

Splashbacks and tiling prices in Halewood
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Halewood and what they mean for a kitchen

Across Merseyside you will often find Victorian terraces, Victorian and Edwardian villas, 1930s semis and converted warehouse flats, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen off the living room, while 1930s semis tend to have a separate kitchen with space to open into a dining room.

Merseyside's mains water is soft, so limescale is rarely a big issue and taps, sinks and boiling water taps stay cleaner for longer. Terraced streets with back entries, city-centre flats with booked lifts and permit parking zones can all affect how and when a kitchen is delivered.

Regulations for kitchen work in Halewood

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Conservation areas and listed buildings are common in older parts of Liverpool and the Wirral, so a new vent on a visible wall may need consent.

Worth knowing before the fit

Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Choosing stone worktops for a Halewood kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
If your Merseyside kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Halewood

How much do splashbacks and tiling cost in Halewood?

Splashbacks and tiling in Halewood typically cost £140 to £380 including VAT for a tiled splashback, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Halewood do you work in?

All of them. Our Merseyside coverage takes in the whole of Halewood, including the L26 postcode district, as well as surrounding towns such as Speke. If you are unsure, send us your postcode.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Splashbacks and tiling in neighbouring towns

Close to Halewood? We cover these nearby towns too: