Splashbacks and tiling in Gosport

Who usually needs splashbacks and tiling in Gosport?

Some households in Hampshire want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down.

If your Gosport home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from. We cover all of Gosport, including the PO12 postcode district, and travel out to neighbouring towns across Hampshire.

What do splashbacks and tiling in Gosport include?

Here is what usually goes into splashbacks and tiling, adjusted to your Gosport kitchen after we have measured it:

Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Free survey visit to check the walls, agree the layout and give an itemised quote
Full-height or feature tiling behind the hob, sink or open shelving
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop

Splashbacks and tiling prices in Gosport

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Splashbacks and tiling prices in Gosport
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£170–£460
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£340–£920
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£290–£690
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Gosport?

The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Regulations for kitchen work in Gosport

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book splashbacks and tiling in Gosport

If your Hampshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Gosport home, as cutting dust and adhesive travel further than you expect.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Gosport

How much do splashbacks and tiling cost in Gosport?

For a tiled splashback, budget around £170 to £460 including VAT in Gosport. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Can you measure up in Gosport before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Gosport. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Nearby places we cover

Close to Gosport? We cover these nearby towns too: