Splashbacks and tiling in Sheffield

Is splashbacks and tiling right for your Sheffield kitchen?

If your Sheffield home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

Many people in South Yorkshire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease. If your home is in Sheffield or close by in Fulwood or Rotherham, the same survey, quote and fitting process applies.

What do splashbacks and tiling in Sheffield include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Tiled splashbacks between the worktop and wall units, set out from a centre line
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Old tiles removed and walls prepared, patched or boarded where needed
Free survey visit to check the walls, agree the layout and give an itemised quote
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs

Splashbacks and tiling prices in Sheffield

As a starting point for Sheffield, these ranges include VAT at 20% and allow for typical labour costs in Yorkshire and the Humber. Labour rates in Yorkshire and the Humber are generally lower than in London and the South East, so these ranges are a little below the national guide.

Splashbacks and tiling prices in Sheffield
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Sheffield homes

You will find Victorian terraces, former pit village terraces, 1930s semis and post-war council-built houses throughout South Yorkshire. Sheffield's Victorian terraces often have a small kitchen behind the living room, while 1930s semis and post-war houses tend to have a compact kitchen beside the dining room.

Steep hillside streets and terraces with steps up to the front door can make carrying long worktops and tall units harder, so access is checked at the survey. Hardness varies across South Yorkshire: Sheffield's supply is generally soft, while some eastern areas are harder, so check with your supplier before choosing a filter.

What rules apply to splashbacks and tiling in Sheffield?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Parts of Sheffield and Barnsley lie within the Peak District National Park, and listed buildings or conservation areas elsewhere may need consent for new external vents.

Getting the most from your splashbacks and tiling

Hold a few of your chosen tiles against the wall in your Sheffield kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Choosing stone worktops for a Sheffield kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
If you are renting out a flat in Sheffield, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.

Questions about splashbacks and tiling in Sheffield

How much do splashbacks and tiling cost in Sheffield?

Guide prices in Sheffield are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Sheffield?

Yes. We work across Sheffield, including the S1, S2, S3, S4, S5 and S7 postcode districts, and nearby towns such as Fulwood and Rotherham. Book a free survey visit and we will arrange a time that suits you.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Also covering nearby towns

The same service is available a short drive from Sheffield, including: