Splashbacks and tiling in Fulwood

Why do people in Fulwood choose splashbacks and tiling?

If the kitchen in your Fulwood home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units.

Landlords around South Yorkshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. We work throughout Fulwood (S10) and across the wider South Yorkshire area.

What we cover for splashbacks and tiling in Fulwood

Your written quote lists everything included. For splashbacks and tiling, that normally means:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Old tiles removed and walls prepared, patched or boarded where needed
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Free survey visit to check the walls, agree the layout and give an itemised quote
Full-height or feature tiling behind the hob, sink or open shelving
Tiled splashbacks between the worktop and wall units, set out from a centre line

What should you budget for splashbacks and tiling in Fulwood?

The figures below are guide prices for Fulwood, including VAT and adjusted for typical costs across Yorkshire and the Humber. The fixed price comes after we have measured up. Labour rates in Yorkshire and the Humber are generally lower than in London and the South East, so these ranges are a little below the national guide.

What should you budget for splashbacks and tiling in Fulwood?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Fulwood homes

Typical homes in this part of South Yorkshire include Victorian terraces, former pit village terraces, 1930s semis and post-war council-built houses. Sheffield's Victorian terraces often have a small kitchen behind the living room, while 1930s semis and post-war houses tend to have a compact kitchen beside the dining room.

Steep hillside streets and terraces with steps up to the front door can make carrying long worktops and tall units harder, so access is checked at the survey. Hardness varies across South Yorkshire: Sheffield's supply is generally soft, while some eastern areas are harder, so check with your supplier before choosing a filter.

Do you need approval for splashbacks and tiling in Fulwood?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Parts of Sheffield and Barnsley lie within the Peak District National Park, and listed buildings or conservation areas elsewhere may need consent for new external vents.

Planning ahead

Hold a few of your chosen tiles against the wall in your Fulwood kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Choosing stone worktops for a Fulwood kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
If your South Yorkshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Fulwood

How much do splashbacks and tiling cost in Fulwood?

Guide prices in Fulwood are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Fulwood do you work in?

All of them. Our South Yorkshire coverage takes in the whole of Fulwood, including the S10 postcode district, as well as surrounding towns such as Sheffield. If you are unsure, send us your postcode.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Splashbacks and tiling near Fulwood

Close to Fulwood? We cover these nearby towns too: