Splashbacks and tiling · England
Splashbacks and tiling in Oxfordshire
Our splashbacks and tiling work covers the whole of Oxfordshire, including Oxford, Banbury and Abingdon.
What prompts splashbacks and tiling in Oxfordshire?
When an Oxfordshire kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit.
Many people in Oxfordshire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.
What do splashbacks and tiling in Oxfordshire include?
Your written quote lists everything included. For splashbacks and tiling, that normally means:
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Full-height or feature tiling behind the hob, sink or open shelving
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
- Socket and switch plates refitted by an electrician once the tiling is finished
How much do splashbacks and tiling cost in Oxfordshire?
As a starting point for Oxfordshire, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £170–£460 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £340–£920 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £290–£690 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Kitchens in homes across Oxfordshire
Across Oxfordshire you will often find cotswold stone cottages, Victorian terraces, 1930s semis and new-build estates, and each shapes the kitchen differently. Oxford's Victorian terraces often have a narrow galley in the back addition, while stone cottages in market towns and villages tend to have small, low-ceilinged kitchens.
Water across Oxfordshire is hard, so limescale on taps, kettles and boiling water taps is common, and a filter is worth planning in. City streets with permit parking and narrow village lanes can both slow deliveries, so parking and the carry route for worktops are checked at the survey.
Opening a back-addition kitchen into the dining room or side return is a common project in an Oxford terrace. Newer estate houses in Bicester or Didcot more often suit a supply-and-fit replacement with an island or peninsula, integrated appliances and a utility area for laundry.
Rules for splashbacks and tiling in Oxfordshire
Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.
Oxford's many listed buildings and conservation areas, along with Cotswold stone villages, may need consent before a new vent is cut or historic features are removed.
Before you start
- Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
- Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.
- Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.
- Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
- Ask to see where the tiling will start before the first row goes on in your Oxfordshire kitchen, so narrow cut tiles end up in corners rather than on show.
- Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Questions about splashbacks and tiling in Oxfordshire
How much do splashbacks and tiling cost in Oxfordshire?
Splashbacks and tiling in Oxfordshire typically cost £170 to £460 including VAT for a tiled splashback, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Oxfordshire?
Yes. We carry out splashbacks and tiling across Oxfordshire, including Oxford, Banbury, Abingdon and Bicester. Every job starts with a free survey visit and an itemised written quote.
Can a glass splashback go behind a gas hob?
Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.
When are splashbacks fitted during a kitchen installation?
Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.
Which grout and sealant are easiest to keep clean?
A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.
Splashbacks and tiling in towns across Oxfordshire
Choose a town for local guide prices and postcode coverage:
- Splashbacks and tiling in Oxford
- Splashbacks and tiling in Banbury
- Splashbacks and tiling in Abingdon
- Splashbacks and tiling in Bicester
- Splashbacks and tiling in Didcot
- Splashbacks and tiling in Witney
- Splashbacks and tiling in Wantage
- Splashbacks and tiling in Henley-on-Thames
- Splashbacks and tiling in Faringdon
- Splashbacks and tiling in Chipping Norton