Splashbacks and tiling in Long Eaton

Thinking about splashbacks and tiling in Long Eaton?

Some households in Derbyshire want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down.

Many people in Derbyshire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease. We cover all of Long Eaton, including the NG10 postcode district, and travel out to neighbouring towns across Derbyshire.

What does the job involve?

Your written quote lists everything included. For splashbacks and tiling, that normally means:

Free survey visit to check the walls, agree the layout and give an itemised quote
Tiled splashbacks between the worktop and wall units, set out from a centre line
Full-height or feature tiling behind the hob, sink or open shelving
Socket and switch plates refitted by an electrician once the tiling is finished
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint

Guide prices for splashbacks and tiling in Long Eaton

As a starting point for Long Eaton, these ranges include VAT at 20% and allow for typical labour costs in the East Midlands. For the East Midlands, these ranges are close to the national figures.

Guide prices for splashbacks and tiling in Long Eaton
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£390
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£290–£780
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£580
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Long Eaton homes

You will find gritstone and limestone cottages, Victorian terraces, 1930s semis and former mining village terraces throughout Derbyshire. Terraces in Derby and Chesterfield often have a long galley behind the back room, while stone cottages in the Peak District may have a small kitchen in a rear extension.

Steep hill villages and narrow lanes can limit delivery vehicles, while terraced streets in the towns may have little parking near the front door. Water hardness varies across Derbyshire, so check with your supplier; where it is harder, limescale on taps and boiling water taps is worth planning for.

Regulations for kitchen work in Long Eaton

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Homes in the Peak District National Park, listed buildings and conservation areas may need consent for a new vent on a visible wall or alterations to historic features.

Tips before you start

Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Long Eaton home, as cutting dust and adhesive travel further than you expect.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Ask to see where the tiling will start before the first row goes on in your Long Eaton kitchen, so narrow cut tiles end up in corners rather than on show.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Long Eaton

How much do splashbacks and tiling cost in Long Eaton?

For a tiled splashback, budget around £150 to £390 including VAT in Long Eaton. That reflects typical costs in the East Midlands; we confirm the actual figure in writing once we have measured up.

Can you measure up in Long Eaton before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Long Eaton. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Splashbacks and tiling near Long Eaton

We also carry out splashbacks and tiling in these towns near Long Eaton: