Splashbacks and tiling in Leatherhead

Is splashbacks and tiling right for your Leatherhead kitchen?

If the units in your Leatherhead kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

Landlords around Surrey often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. Leatherhead sits about 10 miles east of Woking, and our Surrey coverage takes in everything in between.

What do splashbacks and tiling in Leatherhead include?

Your written quote lists everything included. For splashbacks and tiling, that normally means:

Old tiles removed and walls prepared, patched or boarded where needed
Free survey visit to check the walls, agree the layout and give an itemised quote
Socket and switch plates refitted by an electrician once the tiling is finished
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs

What do splashbacks and tiling cost in Leatherhead?

Typical splashbacks and tiling prices for homes in Leatherhead, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What do splashbacks and tiling cost in Leatherhead?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£170–£460
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£340–£920
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£290–£690
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Leatherhead?

In and around Leatherhead, homes range across 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

Regulations for kitchen work in Leatherhead

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Worth knowing before the fit

Hold a few of your chosen tiles against the wall in your Leatherhead kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Choosing stone worktops for a Leatherhead kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Leatherhead

How much do splashbacks and tiling cost in Leatherhead?

Splashbacks and tiling in Leatherhead typically cost £170 to £460 including VAT for a tiled splashback, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Leatherhead?

Yes. We work across Leatherhead, including the KT22 postcode district, and nearby towns such as Epsom and Cobham. Book a free survey visit and we will arrange a time that suits you.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Splashbacks and tiling in neighbouring towns

Close to Leatherhead? We cover these nearby towns too: