Splashbacks and tiling in Lancaster

Is splashbacks and tiling right for your Lancaster kitchen?

Landlords around Lancashire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.

Many people in Lancashire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease. We cover all of Lancaster, including the LA1 postcode district, and travel out to neighbouring towns across Lancashire.

What we cover for splashbacks and tiling in Lancaster

Here is what usually goes into splashbacks and tiling, adjusted to your Lancaster kitchen after we have measured it:

Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Full-height or feature tiling behind the hob, sink or open shelving
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Free survey visit to check the walls, agree the layout and give an itemised quote
Tiled splashbacks between the worktop and wall units, set out from a centre line
Stone upstands and splashbacks templated and fitted alongside a stone worktop

What do splashbacks and tiling cost in Lancaster?

As a starting point for Lancaster, these ranges include VAT at 20% and allow for typical labour costs in the North West. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

What do splashbacks and tiling cost in Lancaster?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

Across Lancashire you will often find stone-built mill-town terraces, red-brick Victorian terraces, 1930s semis and seaside bungalows, and each shapes the kitchen differently. Mill-town terraces often have a small back kitchen opening onto a yard, while seaside bungalows and 1930s semis tend to have a square kitchen at the rear.

Most of Lancashire has soft mains water, so heavy limescale is rare and taps, sinks and appliances stay cleaner for longer. Back alleys and yards can help with deliveries, though narrow yard gates and steep hill streets may limit how long worktops come in.

Do you need approval for splashbacks and tiling in Lancaster?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Where an older town-centre home is listed or in a conservation area, a new vent on a front wall may need consent, and flats in converted houses usually need freeholder approval.

Tips before you start

Hold a few of your chosen tiles against the wall in your Lancaster kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
If you are renting out a flat in Lancaster, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Lancaster

How much do splashbacks and tiling cost in Lancaster?

Splashbacks and tiling in Lancaster typically cost £140 to £380 including VAT for a tiled splashback, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Lancaster do you work in?

All of them. Our Lancashire coverage takes in the whole of Lancaster, including the LA1 postcode district, as well as surrounding towns such as Morecambe. If you are unsure, send us your postcode.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Splashbacks and tiling in neighbouring towns

We also carry out splashbacks and tiling in these towns near Lancaster: