Splashbacks and tiling · England
Splashbacks and tiling in Lancashire
Splashbacks and tiling in Lancashire start with a free visit to measure up, then a written scope and quote before any work begins.
Why do people in Lancashire choose splashbacks and tiling?
Some households in Lancashire want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down.
Many people in Lancashire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.
What do splashbacks and tiling in Lancashire include?
The exact scope is agreed after the survey, but a typical job in Lancashire covers:
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Full-height or feature tiling behind the hob, sink or open shelving
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
- Socket and switch plates refitted by an electrician once the tiling is finished
How much do splashbacks and tiling cost in Lancashire?
Use these ranges to plan your budget. They include VAT, reflect costs in the North West, and are firmed up once we have seen your Lancashire kitchen. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £140–£380 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £280–£760 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £240–£570 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Kitchens in homes across Lancashire
The housing mix across Lancashire includes stone-built mill-town terraces, red-brick Victorian terraces, 1930s semis and seaside bungalows, so no two kitchen fits are quite alike. Mill-town terraces often have a small back kitchen opening onto a yard, while seaside bungalows and 1930s semis tend to have a square kitchen at the rear.
Most of Lancashire has soft mains water, so heavy limescale is rare and taps, sinks and appliances stay cleaner for longer. Back alleys and yards can help with deliveries, though narrow yard gates and steep hill streets may limit how long worktops come in.
Opening the back kitchen into the middle room is a common way to gain space in a mill-town terrace. Bungalows on the Fylde coast are often refitted for easier living, with better lighting, more drawers and appliances at a comfortable height.
Rules for splashbacks and tiling in Lancashire
Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.
Where an older town-centre home is listed or in a conservation area, a new vent on a front wall may need consent, and flats in converted houses usually need freeholder approval.
Before you start
- Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
- Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
- Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.
- Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.
- Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Lancashire home, as cutting dust and adhesive travel further than you expect.
- Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Questions about splashbacks and tiling in Lancashire
How much do splashbacks and tiling cost in Lancashire?
Guide prices in Lancashire are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Lancashire?
Yes. We carry out splashbacks and tiling across Lancashire, including Preston, Burnley, Blackburn and Blackpool. Every job starts with a free survey visit and an itemised written quote.
When are splashbacks fitted during a kitchen installation?
Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.
Can a glass splashback go behind a gas hob?
Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.
Which grout and sealant are easiest to keep clean?
A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.
Splashbacks and tiling in towns across Lancashire
Choose a town for local guide prices and postcode coverage:
- Splashbacks and tiling in Preston
- Splashbacks and tiling in Burnley
- Splashbacks and tiling in Blackburn
- Splashbacks and tiling in Blackpool
- Splashbacks and tiling in Morecambe
- Splashbacks and tiling in Lancaster
- Splashbacks and tiling in Lytham St Annes
- Splashbacks and tiling in Skelmersdale
- Splashbacks and tiling in Leyland
- Splashbacks and tiling in Accrington
- Splashbacks and tiling in Chorley
- Splashbacks and tiling in Darwen
- Splashbacks and tiling in Thornton-Cleveleys
- Splashbacks and tiling in Nelson
- Splashbacks and tiling in Fleetwood
- Splashbacks and tiling in Ormskirk
- Splashbacks and tiling in Rawtenstall
- Splashbacks and tiling in Colne
- Splashbacks and tiling in Poulton-le-Fylde
- Splashbacks and tiling in Clitheroe
- Splashbacks and tiling in Garstang