Splashbacks and tiling in Kingswinford

Is splashbacks and tiling right for your Kingswinford kitchen?

Many people in the West Midlands choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

If the kitchen in your Kingswinford home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units. Our West Midlands coverage reaches every part of Kingswinford (DY6) and out towards Brierley Hill.

What we cover for splashbacks and tiling in Kingswinford

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Tiled splashbacks between the worktop and wall units, set out from a centre line

What should you budget for splashbacks and tiling in Kingswinford?

The figures below are guide prices for Kingswinford, including VAT and adjusted for typical costs across the West Midlands. The fixed price comes after we have measured up. For the West Midlands, these ranges are close to the national figures.

What should you budget for splashbacks and tiling in Kingswinford?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£250–£600
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

In and around Kingswinford, homes range across Victorian terraces, 1930s semis, post-war council-built houses and post-war flats and maisonettes. Victorian terraces often have a long galley behind the back room, while 1930s semis across Birmingham and the Black Country tend to have a small kitchen at the rear.

Birmingham's water is relatively soft, while much of the Black Country and Coventry is harder, so check your supplier's hardness figure before choosing a filter. Busy terraced streets, permit parking near town centres and blocks with shared lifts can each affect delivery times and how worktops reach the kitchen.

Do you need approval for splashbacks and tiling in Kingswinford?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Conservation areas and listed buildings, including parts of Birmingham and Solihull, may need consent for new vents, and flat owners usually need the freeholder's consent first.

Tips before you start

Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Kingswinford home, as cutting dust and adhesive travel further than you expect.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.

Questions about splashbacks and tiling in Kingswinford

How much do splashbacks and tiling cost in Kingswinford?

Splashbacks and tiling in Kingswinford typically cost £150 to £400 including VAT for a tiled splashback, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Kingswinford?

Yes. We work across Kingswinford, including the DY6 postcode district, and nearby towns such as Brierley Hill and Stourbridge. Book a free survey visit and we will arrange a time that suits you.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Splashbacks and tiling in neighbouring towns

Neighbouring towns where we offer splashbacks and tiling: