Splashbacks and tiling in Halesowen

When do splashbacks and tiling make sense in Halesowen?

Homeowners in Halesowen often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

If the units in your Halesowen kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own. Kitchens in every part of Halesowen are covered, and the survey visit is free wherever you are in the West Midlands.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote
Old tiles removed and walls prepared, patched or boarded where needed
Full-height or feature tiling behind the hob, sink or open shelving
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs

What should you budget for splashbacks and tiling in Halesowen?

The figures below are guide prices for Halesowen, including VAT and adjusted for typical costs across the West Midlands. The fixed price comes after we have measured up. For the West Midlands, these ranges are close to the national figures.

What should you budget for splashbacks and tiling in Halesowen?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£250–£600
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes around Halesowen

In and around Halesowen, homes range across Victorian terraces, 1930s semis, post-war council-built houses and post-war flats and maisonettes. Victorian terraces often have a long galley behind the back room, while 1930s semis across Birmingham and the Black Country tend to have a small kitchen at the rear.

Busy terraced streets, permit parking near town centres and blocks with shared lifts can each affect delivery times and how worktops reach the kitchen. Birmingham's water is relatively soft, while much of the Black Country and Coventry is harder, so check your supplier's hardness figure before choosing a filter.

Do you need approval for splashbacks and tiling in Halesowen?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Conservation areas and listed buildings, including parts of Birmingham and Solihull, may need consent for new vents, and flat owners usually need the freeholder's consent first.

Planning ahead

Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Halesowen home, as cutting dust and adhesive travel further than you expect.
Ask to see where the tiling will start before the first row goes on in your Halesowen kitchen, so narrow cut tiles end up in corners rather than on show.
Choosing stone worktops for a Halesowen kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.

Questions about splashbacks and tiling in Halesowen

How much do splashbacks and tiling cost in Halesowen?

For a tiled splashback, budget around £150 to £400 including VAT in Halesowen. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Do you cover all of Halesowen?

Yes. We work across Halesowen, including the B63 postcode district, and nearby towns such as Brierley Hill and Dudley. Book a free survey visit and we will arrange a time that suits you.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Nearby places we cover

The same service is available a short drive from Halesowen, including: