Splashbacks and tiling in Hornsea

Why splashbacks and tiling for a Hornsea home?

When a Hornsea kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit.

If the kitchen in your Hornsea home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units. We cover all of Hornsea, including the HU18 postcode district, and travel out to neighbouring towns across the East Riding of Yorkshire.

What do splashbacks and tiling in Hornsea include?

Your written quote lists everything included. For splashbacks and tiling, that normally means:

Tiled splashbacks between the worktop and wall units, set out from a centre line
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Socket and switch plates refitted by an electrician once the tiling is finished

What do splashbacks and tiling cost in Hornsea?

These guide ranges include VAT at 20% and are adjusted for prices in Yorkshire and the Humber. We confirm your price in writing after a free survey visit. Costs across Yorkshire and the Humber tend to sit under UK averages, which these ranges reflect.

What do splashbacks and tiling cost in Hornsea?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes around Hornsea

You will find Victorian terraces, interwar semis, post-war council-built houses and coastal bungalows throughout the East Riding of Yorkshire. Victorian terraces in Hull often have a long, narrow back kitchen, while coastal bungalows and interwar semis tend to have a squarer room that suits an L-shape.

Rural roads and farm tracks across the Wolds can be narrow for lorries, while terraced streets in Hull often have limited parking near the front door. Much of the East Riding draws on chalk groundwater and is hard, so limescale on taps and boiling water taps is common and a filter can help.

Do you need approval for splashbacks and tiling in Hornsea?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Consent is rarely needed for a kitchen, though listed Georgian houses and conservation areas, such as the older parts of Beverley, may need it for a new street-facing vent.

Tips before you start

Hold a few of your chosen tiles against the wall in your Hornsea kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Choosing stone worktops for a Hornsea kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Hornsea

How much do splashbacks and tiling cost in Hornsea?

Splashbacks and tiling in Hornsea typically cost £140 to £380 including VAT for a tiled splashback, based on prices in Yorkshire and the Humber. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Hornsea as well?

Yes. As well as Hornsea itself, we cover the rest of the East Riding of Yorkshire and nearby towns such as Beverley and Bridlington. The process is the same wherever the kitchen is.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Splashbacks and tiling near Hornsea

Neighbouring towns where we offer splashbacks and tiling: