Splashbacks and tiling in Beverley

Thinking about splashbacks and tiling in Beverley?

Landlords around the East Riding of Yorkshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.

If the units in your Beverley kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own. Beverley sits about 8 miles north-west of Hull, and our East Riding of Yorkshire coverage takes in everything in between.

What do splashbacks and tiling in Beverley include?

The exact scope is agreed after the survey, but a typical job in Beverley covers:

Full-height or feature tiling behind the hob, sink or open shelving
Socket and switch plates refitted by an electrician once the tiling is finished
Tiled splashbacks between the worktop and wall units, set out from a centre line
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Old tiles removed and walls prepared, patched or boarded where needed

What do splashbacks and tiling cost in Beverley?

Typical splashbacks and tiling prices for homes in Beverley, including VAT and adjusted for Yorkshire and the Humber. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in Yorkshire and the Humber usually come in below the national guide, as labour rates are lower than in the South East.

What do splashbacks and tiling cost in Beverley?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Beverley homes

Across the East Riding of Yorkshire you will often find Victorian terraces, interwar semis, post-war council-built houses and coastal bungalows, and each shapes the kitchen differently. Victorian terraces in Hull often have a long, narrow back kitchen, while coastal bungalows and interwar semis tend to have a squarer room that suits an L-shape.

Rural roads and farm tracks across the Wolds can be narrow for lorries, while terraced streets in Hull often have limited parking near the front door. Much of the East Riding draws on chalk groundwater and is hard, so limescale on taps and boiling water taps is common and a filter can help.

Building regulations, electrics and gas in Beverley

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Consent is rarely needed for a kitchen, though listed Georgian houses and conservation areas, such as the older parts of Beverley, may need it for a new street-facing vent.

Planning ahead

Choosing stone worktops for a Beverley kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Hold a few of your chosen tiles against the wall in your Beverley kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Beverley

How much do splashbacks and tiling cost in Beverley?

Guide prices in Beverley are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Beverley as well?

Yes. As well as Beverley itself, we cover the rest of the East Riding of Yorkshire and nearby towns such as Hull and Driffield. The process is the same wherever the kitchen is.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Nearby places we cover

Neighbouring towns where we offer splashbacks and tiling: